Maintenance And Cleaning; Daily Cleaning, Maintenance And Inspection; Emptying The Soil Bin; Pot Track Pawl - Javo Standaard Manual

Maintenance and cleaning

Always remove the plug from the socket before carrying out work. A number of items of personal safety equipment
(PSE) must be worn before starting maintenance work:

Safety glasses

Safety gloves

Safety clothing

Daily cleaning, maintenance and inspection

Check the tension of the chains and belts is still correct daily. (For specifications see pages 8 and 9).
In addition, you should check that no pots or other materials have fallen into the machine. If they have, they should
be removed before the machine is restarted.

Emptying the soil bin

1. Remove cover (A).
2. Switch on the elevator until the bin is empty.
3. Switch the machine off and remove the plug from the socket.
4. Clean the paddles (B).
Note:
- Do not clean using water. Use compressed air and/or a brush.
- Do not use sharp tools to prevent damage to the belt.
- Clean the machine daily when using clay or aggressive/sticky soil types
-Take care near moving parts

Pot track pawl

Adjust eccentric bolt (A) to increase the stroke of the pawl (B). The closer the bolt is to the
pivot point the longer the stroke.

Nature and frequency of maintenance and cleaning

Part
Drill arm on drill unit
Pot track drive (bolt on rod)
Pot track chain
Drill rods
Adjustable drill spindle
Water separators

Tools and equipment required

The standard maintenance set supplied with the machine contains the
following:
Version 2010-11-1
Action
Apply a thin coating of grease
Apply a thin coating of grease
Spray with light oil
Spray with light oil
Spray with light oil
Drain water
Javo Standard potting machine manual
Frequency
After every 40 operating hours
After every 40 operating hours
After every 320 operating hours
After every 320 operating hours
After every 320 operating hours
After every 16 operating hours
Page 13