Table of Contents
Advertisement
Storage of Supplies
Always observe the stated weight limits when placing items on the shelf.
Installing Side Panels
The bassinet is surrounded by two side panels and two end panels, which
can be opened independently of each other. End panels have cutouts with
U-grommets for routing circuits and infant cables.
SIDE
PANEL
HINGE
Figure 1. Installation of Side Panel
1. Insert lower pins on panel hinges into the left- and right-hand slots in
2. Position panel semi-upright.
3. Press panel down firmly, until pins lock into position at the bottom of
4. Install all four panels in the same fashion.
5. Verify the panels are seated correctly.
bassinet base.
slots.
•
Tilt panel fully upright and let it drop into locking position.
Preparation
Preparation
DI0001
11
Advertisement
Table of Contents
