Features - ICP DAS USA I-7532M-FD User Manual

Hide thumbs Also See for I-7532M-FD:

Table of Contents

1.2. Features

 Compatible with the ISO 11898-2 standard.

 Compatible with CAN specification 2.0 A/B and FD.

 CAN FD support for ISO and Non-ISO (Bosch) standards switchable.

 CAN FD bit rates for data field from 100 kbps to 3000 kbps

 CAN bit rates from 10 kbps to 1000 kbps.

 Support CAN Bus message filter configuration. White-list filtering method and

each port supports 128 groups of standard IDs and 64 groups of extended IDs.

 Support CAN/CAN FD frame forwarding rules, including basic forwarding rule,

mapping rule, merging rule and splitting rule. When receiving a frame on one

CAN port, this frame is processed via these rules and then send out to another

port. The process priority level of these rules are "merging rule" = "splitting rule"

> "mapping rule" > "basic forwarding rule".

 Support CAN network status analysis via Utility tool.

 Messaging traffic of each port up to 10,000 fps.

 The baud rate of each port can be different for highly flexibility.

 Built-in switchable 120 ohm terminal resistor for CAN network.

I-7532M-FD ( 2-port CAN/CAN FD Bridge )

User Manual (version 1.0.0)

Page: 7

Table of Contents