Software Utility; Install The I-7532-Fd Utility - ICP DAS USA I-7532M-FD User Manual

3. Software Utility

When users want to use user-defined CAN/CAN FD baud rate, CAN/CAN FD
message filter and CAN mapping, merging, splitting rule function on the I-7532M-FD,
the I-7532M-FD Utility tool may be needed.

3.1. Install the I-7532-FD Utility

Step 1: Get the I-7532-FD Utility
The software is located at:
http://www.icpdas.com/en/download/show.php?num=3019&model=I-7532M-FD
Step 2: Install .NET Framework 3.5 component
The I-7532-FD Utility tool requires the .NET Framework 3.5 components. After
executing the "Setup.msi" file, it will start to install .NET Framework 3.5
components.
Step 3: Install Utility tool
After installing the .Net Framework components, the software will continue to install
the Utility tool.
1. Click the "Next" button to continue.
I-7532M-FD ( 2-port CAN/CAN FD Bridge )
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
User Manual (version 1.0.0) Page: 15