Can Mapping Rule Configuration - ICP DAS USA I-7532M-FD User Manual

3.3.4.

CAN Mapping Rule Configuration

This field is used to configure mapping rules of the device. Mapping rule is used to
modify the received CAN/CAN FD frame format (including type, format, ID, data length,
bit rate switch and data ) from one port and then transfer it to another port. It is useful for
user to change the received CAN/CAN FD format to another one. Each device
maximum supports 32 mapping rules.
[Enable]
Enable or disable mapping rule function of this CAN port.
[No]
Rule number. Maximum support 32 mapping rules. The smaller the number, the higher
the process priority level.
[C_Type]
CAN or CAN FD frame type.
0: CAN frame, 1: CAN FD frame. *: no check.
[F_Type]
Standard or extended frame type
0: standard frame, 1: extended frame. *: no check.
I-7532M-FD ( 2-port CAN/CAN FD Bridge ) User Manual (version 1.0.0) Page: 29
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com