Firmware Upgrade - ICP DAS USA I-7532M-FD User Manual

Hide thumbs Also See for I-7532M-FD:

Table of Contents

4. Firmware Upgrade

Please refer to the following steps to upgrade the firmware of I-7532M-FD module.

Step 1: Power off the I-7532M-FD.

Step 2: Set the Init. dip switch to 'ON' position.

Step 3: Power on the I-7532M-FD, the red and green leds of USB, CAN1 and CAN2 will

polling to flash per 200 milliseconds.

Step 4: Connect the PC available USB port with the USB port of the I-7532M-FD. Users

can find the communication cable (CA-USB10) in the product box.

Step 5: At this time, the I-7532M-FD module will be simulated as a "USB Mass

Storage Device", and one more "USB Disk" window, will pop up on the PC side.

Then users can upgrade the firmware of the I-7532M-FD module via this USB

disk.

Step 6: Get the "Firmware Update Tool" and firmware file.

The "Firmware Update Tool" is located at:

http://www.icpdas.com/en/download/show.php?num=3018&model=I-7532M-FD

The firmware is located at:

http://www.icpdas.com/en/download/show.php?num=3020&model=I-7532M-FD

I-7532M-FD ( 2-port CAN/CAN FD Bridge )

Figure 4-1-1 Wire connection of the USB

User Manual (version 1.0.0)

Page: 43

Table of Contents