Introduction; Technical Data; Controls And Conectors - ESAB Origo Feed 302N P0 User Manual And Spare Parts

2 INTRODUCCION
™
The Origo Feed 302N P0 wire feeders are designed for semi-automatic MIG/MAG welding with solid wires,
cored and aluminium in services of average and heavy production.
They have a wire feed mechanism of 2 feed rollers engaged and an electronic control system. They can be
installed on the power source or on a wheel kit to move it around the workplace (optional).
3

TECHNICAL DATA

Power supply (V - Hz)
Wire feed speed (m/mm)
Wire diameter (mm)
Solid steel
Cored wire
Aluminium
Welding gun connection
Manual feeding of the wire
Bobbin cover
Dimensions (W x L x H) (mm)
Weight (kg)
4 CONTROLS AND CONNECTORS
4.1) Front panel
1- Knob for setting wire feed speed.
2- Interruptor of manual wire release - Allows the wire to be fed without voltage in the welding gun.
3- Euro-conector for connect welding gun.
4.2) Side console
4- Wire feed mechanism.
4.3) Rear panel
5- Connection for welding current from power source.
6- Connection for control cable from power source.
7- Connection for shielding gas.
8- Brake hub.
9- Inlet nozzle.
Euro-conector
230 x 570 x 380 (without bobbin cover)
230 x 570 x 455 (with bobbin cover)
- 21 -
42 - 50/60
1,5 - 22,0
0,6 - 1,6
1,2 - 1,6
1,0 - 1,6
Yes
Optional
10,8