Stryker Medical Renaissance Series Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Medical Manuals
  4. Medical Equipment
  5. Renaissance Series
  6. Maintenance manual

Stryker Medical Renaissance Series Maintenance Manual

Hide thumbs Also See for Renaissance Series:
Table of Contents

Advertisement

Quick Links

Download this manual
IMPORTANT
File in your
maintenance
records
Renaissance Series
2020 Critical Care Bed
MAINTENANCE MANUAL
For Parts or Technical Assistance
1–800–327–0770

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Renaissance Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Stryker Medical Renaissance Series

Summary of Contents for Stryker Medical Renaissance Series

  • Page 1 IMPORTANT File in your maintenance records Renaissance Series 2020 Critical Care Bed MAINTENANCE MANUAL For Parts or Technical Assistance 1–800–327–0770...

  • Page 2: Table Of Contents

    Table of Contents Introduction Specifications ................Warning / Caution / Note Definition .
  • Page 3 Table of Contents Assembly Drawings and Parts Lists (Continued) Litter Assembly, All Options ............60–62 Litter Assembly, All Options w/o Head End Keypad .

  • Page 4: Introduction

    Introduction INTRODUCTION This manual is designed to assist you with the maintenance of the 2020 Renaissance Series Critical Care Bed. Read it thoroughly before using the equipment or beginning any maintenance on it. SPECIFICATIONS Maximum Weight Capacity 500 pounds Overall Bed Length/Width 90”/38”...
  • Page 5 Cleaning Hand wash all surfaces of the stretcher with warm water and mild detergent. Dry thoroughly. DO NOT STEAM CLEAN, PRESSURE WASH, HOSE OFF OR ULTRASONICALLY CLEAN. Using these methods of cleaning is not recommended and may void this product’s warranty. Clean Velcro AFTER EACH USE.

  • Page 6: Preventative Maintenance

    Preventative Maintenance CHECKLIST All fasteners secure Siderails move and lock properly All casters lock with brake pedal engaged Foot end steering caster locks with steer engaged (page 9) Fowler crank operating properly (page 76) Knee Gatch crank operating properly (page 75) Lift pedal operating properly (page 6) Trendelenburg/Reverse Trendelenburg pedals operating properly (page 6) All functions on head and foot end control panels operating properly –head end is optional equipment–...

  • Page 7: Service Information

    Service Information MECHANICAL TROUBLESHOOTING PROBLEM/SYMPTOM SOLUTION(S) Litter will not lower with foot pedals depressed. Adjust valve control linkage rods (page 10). Litter will not lift when foot pedal pumped. Add hydraulic fluid (page 7). Bleed air from hydraulic system (page 7). Change pump pedal cylinder(s).

  • Page 8: Hydraulic Descent Rate Adjustment

    Service Information HYDRAULIC DESCENT RATE ADJUSTMENT The descent rate of either end of the bed can be adjusted by turning the needle valves on the manifold assem- blies located on the base of the bed (see illustration page 11). To access the manifold assemblies, lift and support the foot end of the hood assembly (see page 15).

  • Page 9: Caster Cover Installation And Removal

    Service Information CASTER COVER INSTALLATION AND REMOVAL Looking through the larger of the two side cut–outs, align cover with axle nut or bolt head, as shown. Double Prongs Push down on the opposite side of the cover until single prong engages with caster horn. Single Prong Top View (Cut–Away) Properly Attached...

  • Page 10: Steer Caster Linkage Adjustment

    Service Information STEER CASTER LINKAGE ADJUSTMENT Tools Required: Phillips Head Screwdriver 3/8” Open End Wrench 1/2” Open End Wrench 5/32” Allen Wrench Adjustment Procedure: 1. Lift up and support base hood (see page 15). 2. Using a 5/32” Allen wrench and 3/8” open end wrench, remove items (D), (E) and (F). 3.

  • Page 11: Hydraulic Valve/Release Pedal/Spring Adjustment

    Service Information HYDRAULIC VALVE/RELEASE PEDAL/SPRING ADJUSTMENT Required Tools: 3/8” Open End Wrench (2) 7/16” Open End Wrench Phillips Screwdriver Adjustment Procedure: 1. Lift and support base hood (see page 15). 2. Using a 7/16” open end wrench, adjust pedal stop bumper so that top of pedal is parallel with floor. The pedal should not be able to raise above this point.

  • Page 12: Hydraulic Manifold Replacement Parts

    Service Information 2020 HYDRAULIC MANIFOLD REPLACEMENT PARTS Item Part No. Part Name 2020–170–105 Toggle Valve Assembly 2020–170–102 Needle Cartridge Valve Assembly 2020–170–106 Coil & Wire Assembly* 2020–170–101 Relief Valve Assembly 2020–170–107 Cartridge Assembly 2020–170–103 Check Valve Assembly *Attached wiring harness can be used for head and foot end coil.

  • Page 13: Electrical Troubleshooting

    Service Information ELECTRICAL TROUBLESHOOTING Before attempting to diagnose an apparent electrical problem, be sure the power cord is plugged into a prop- erly grounded hospital grade wall receptacle and the power switch at the foot end of the bed is on. If both these things are done, proceed with diagnosis.
  • Page 14 Service Information ELECTRICAL TROUBLESHOOTING (CONTINUED) PROBLEM/SYMPTOM SOLUTION(S) Fowler and/or Knee Gatch doesn’t lower during Check position of switches on bellows caps. Emergency Drop mode. Check switch capability. Cardiac Chair doesn’t achieve proper positioning. Check potentiometer adjustment on litter control board (page 18 & 19). Emergency Drop delay longer than 3 seconds.

  • Page 15: Static Discharge Precautions

    2 and 3 of the following procedure. Do not place unprotected circuit boards on the floor. All circuit boards to be returned to Stryker Medical should be shipped in the static shielding bags the new boards were shipped in.

  • Page 16: Base Hood Removal And Reinstallation

    Service Information BASE HOOD REMOVAL AND REINSTALLATION Required Tools: Phillips Head Screwdriver 5/32” Ball Driver Bungee Cords or String Procedure: 1. Raise bed to full up and unplug power cord from wall receptacle. 2. Remove four Phillips head screws holding hood to base assembly and separate Velcro that secures hood to base tubes.

  • Page 17: Frame End Removal - Foot End

    Service Information FRAME END REMOVAL – FOOT END If service is required on the electronic portions of the bed, it may be necessary to remove the frame end at the foot end of the bed. Required Tools: Phillips Screwdriver Removal Procedure: 1.

  • Page 18: Litter Control Board Replacement

    Service Information LITTER CONTROL BOARD REPLACEMENT (P/N 2020–2–670) Required Tools: Phillips Head Screwdriver Small Screwdriver Replacement Procedure: 1. Unplug the bed power cord from the wall receptacle. 2. Properly ground yourself (see page 14 for static discharge precautions). 3. Remove the foot end frame end (see page 16). 4.

  • Page 19: Litter Control Board Alignment

    Service Information LITTER CONTROL BOARD ALIGNMENT Required Tools: Phillips Head Screwdriver 3/32” Allen Wrench Needle–Nose Pliers Volt/Ohm Meter Jewelers Screwdriver Thread Loctite Red Lacquer (Finger Nail Polish) Fowler Display Alignment Procedure: NOTE The following procedure is necessary when replacing the litter control board or when LED alignment is not correct on Fowler and Trend.

  • Page 20: Cardiac Chair Fowler Limit Alignment

    Service Information LITTER CONTROL BOARD ALIGNMENT (Continued): Trendelenburg Display Alignment Procedure (Continued): Mechanical Alignment of the Trendelenburg Potentiometer Linkage (Continued): 1. Using a jewelers screwdriver, turn the Trend pot shaft fully clockwise to its mechanical stop. 2. Remove the foot end frame end (see page 16). 3.

  • Page 21: Scale System Diagnostics And Service Diagnostic Mode

    Service Information SCALE SYSTEM DIAGNOSTICS AND SERVICE Diagnostic Mode Functions: 1. Download Barcode: This is a factory set–up mode and is not used in the field. 2. Calibrate Scale: This may be required in the field if replacement of several load cell assemblies or of the scale CPU is required.

  • Page 22: Displaying Individual Load Cell Outputs

    Service Information Displaying Individual Load Cell Outputs: A faulty load cell can be detected by entering diagnostics and displaying individual load cell outputs. 1. Enter the diagnostic mode. The scale monitor will display DOWNLOAD BARCODE when the diagnostic mode is active. 2.

  • Page 23: Replacing A Load Cell

    Service Information Replacing a Load Cell: Required Tools: 3/16” Allen Socket 10 Ft. Lb. Torque Wrench Saw Horse(s) 3M Static Protection 5/64” Allen Wrench Pencil Replacement Procedure: 1. Unplug the power cord from the wall receptacle. 2. Properly ground yourself (see page 14 for static discharge precautions). 3.

  • Page 24: Replacing Scale Cpu

    Service Information Replacing Scale CPU: Required Tools: Phillips Head Screwdriver Small Screwdriver Replacement Procedure: 1. Unplug the power cord from the wall receptacle. 2. Properly ground yourself (see page 14 for static discharge precautions). 3. Remove the foot end frame end from the litter (see page 16 for instructions). 4.
  • Page 25 Service Information Calibration Procedure (Continued): After the reference number is corrected, press and release the WEIGHT SYSTEM ON button. The scale display should read “ADD LBS, HIT ON”. Verify the litter surface is flat. Place the weight being used for calibration in the center of the litter. Repeatedly push and release the LBS./KG.

  • Page 26: Power Board Replacement

    Service Information POWER BOARD REPLACEMENT (P/N 2020–16–950) Required Tools: Phillips Head Screwdriver Small Screwdriver 5/16” Nut Driver Replacement Procedure: WARNING After diagnosing the problem, always unplug the power cord from the wall socket before servicing the bed. 1. Unplug the bed power cord from the wall receptacle. 2.

  • Page 27: Switch Board Replacement

    Service Information HEAD END SWITCH BOARD REPLACEMENT Required Tools: Phillips Head Screwdriver 1/4” Nut Driver Replacement Procedure: 1. Unplug the bed power cord from the wall receptacle. 2. Properly ground yourself (see page 14 for static discharge precautions). 3. Remove the head end frame end. Use the same procedure as for foot end frame end removal (see page 16).

  • Page 28: Junction Board Replacement

    Service Information JUNCTION BOARD REPLACEMENT Required Tools: Phillips Head Screwdriver Bungee Cord 5/32” Ball Driver Small Screwdriver 5/16” Nut Driver Replacement Procedure: WARNING After diagnosing the problem, always unplug the power cord from the wall socket before servicing the bed. 1.

  • Page 29: Base Assembly

    Base Assembly, Low Height & Standard Height Assembly part number 2020–20–310 (Low Height) Assembly part number 2020–70–310 (Standard Height) (reference only) 2020–20–310 2020–70–310 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 2020–20–355 Cylinder Assembly 2020–70–355 Cylinder Assembly 958–1–214 Bellows 2020–1–275...

  • Page 30: Caster/Base Frame Assembly

    Caster/Base Frame Assembly Assembly part number 2020–41–210 (reference only) Item Part No. Part Name Qty. (page 30) Caster Assembly 715–1–158 Caster Nut 1000–59–10 Steer Latch Assembly (page 33) Base Assembly 2020–46–215 Linkage Bar Assembly 2020–46–218 Linkage Bar, Right 38–211 Compression Spring 8–21 Shoulder Bolt 16–2...

  • Page 31: Caster And Wheel Cover Assembly

    Caster and Caster Cover Replacement Kits Item Part No. Part Name Qty. 3–99 Hex Hd. Cap Screw 11–310 Washer 16–60 Hex Nut 715–2–16 Horn Assembly 715–3–96 Hex Hd. Cap Screw 715–1–265 Wheel Cover, Right 715–1–266 Wheel Cover, Left 715–2–25 Wheel 715–1–158 Caster Nut (not shown) P/N 715–269–400 –...

  • Page 32: Caster Assembly With Steer

    715–2–21 Caster Assembly with Steerlock Item Part No. Part Name Qty. 700–10–50 Steer Lock Caster Weldment 715–2–25 Caster Wheel 16–60 Hex Nut 3–99 Hex Bolt 715–3–96 Hex Bolt 1000–59–10 Latch Assembly 11–310 Flat Washer...
  • Page 33 Assembly part number 2020–1–210 (reference only)

  • Page 34: Base Assembly

    Base Assembly Item Part No. Part Name Qty. 2222–1–217 Base Tube Ass’y 2020–1–270 Ft. End Cas. Tube Ass’y 2020–2–271 Hd. End Cas. Tube Ass’y 2020–1–394 Brake Rod Ass’y, Foot 958–1–231 Cam Bushing 2020–1–389 Cam (Machined) 2020–1–386 Brake Arm & Cam Shaft 716–1–275 Brake Pedal 2020–1–390...

  • Page 35: Base Assembly With Standard Power Cord

    Base Assembly with Standard Power Cord Assembly part number 2020–10–210 (reference only) Ground (Green) Neutral (White or Blue) (Black or Brown) PLUG WIRING DETAIL Item Part No. Part Name Qty. 11–156 Washer 2020–1–213 Hood Assembly 2020–2–680 Power Cord 2020–1–170 Specification Label 1550–90–1 Caution Label 988–2–524...

  • Page 36: Base Assembly With Coil Power Cord

    Base Assembly with Optional Coil Power Cord Assembly part number 2020–12–210 (reference only) Ground (Green) Neutral (White or Blue) (Black or Brown) Base Ground Wire Blue Wire PLUG WIRING DETAIL Brown Wire Green/Yellow Wire Black Wire To Ground Base Power Cable p/n 2020–2–641 White Wire...
  • Page 37 Assembly part number 2020–11–210 (reference only)

  • Page 38: Base Assembly With 110V Outlet Option

    Base Assembly with 110V Outlet Option White Wire Load Black Wire Line Blue or White (Neutral) Black or White or Brown Wire Black or Green or Green/Yellow Blue Wire Brown Wire Wire Ground Ground Wire Green (Ground) Brown or Black (Hot) 12–9 4–85...

  • Page 39: Hydraulics Base Assembly

    Base Hydraulics Assembly Assembly part number 2020–70–210 (reference only)
  • Page 40 Base Hydraulics Assembly...
  • Page 41 Head Manifold p/n 2020–70–317 Foot Manifold p/n 2020–70–316 Motor Pump p/n 2020–70–311 Reservoir Ass’y p/n 2020–70–341...
  • Page 42 Base Hydraulics Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 29) Caster Base Assembly 2020–70–492 Hydraulic Hose Cylinder Assembly 2020–70–489 Hydraulic Hose 2020–70–495 Oil Filter Assembly 2020–70–499 Hydraulic Hose 2020–70–311 Pump Motor Assembly 2020–70–445 Hydraulic Hose 2020–70–316 Manifold Ass’y, Ft.

  • Page 43: Base Assembly, Electrical

    Base Assembly, Electrical Assembly part number 2020–1–410 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 41 & 40) Hydraulics Base Ass’y 4–8 Soc. Hd. Cap Screw 2020–1–326 Base Bd. Enclosure 15–4 Jam Nut 2020–1–327 Enclosure Cover 23–25...
  • Page 44 Base Assembly, Electrical Red Wire From Motor Capacitor Wiring Diagram Capacitor p/n 2020–1–413 Pump/Motor Blue Wire From Motor p/n 2020–70–486 Black Wire (Hot) Bellows Bellows Cover Cover Switch Switch Hd/Ft Jack Switch Cable Base Power Cable Tie Cable p/n 38–151 Pump/Motor p/n 2020–2–641 Relay Cable...

  • Page 45: International Base Assembly, Electrical

    International Base Assembly, Electrical Assembly part number 2020–1–475 (reference only) NOTE: 2020–1–475 replaces 2020–1–410 Base Assembly, Electrical for international beds only Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 41 & 40) Hydraulics Base Ass’y 16–16 Fiberlock Nut 2020–1–326...
  • Page 46 International Base Assembly, Electrical Capacitor Wiring Diagram Red Wire From Motor Capacitor p/n 2020–1–413 Blue Wire From Motor Pump/Motor p/n 2020–1–428 Black Wire (Hot) Bellows Bellows Cover Cover Switch Switch Hd./Ft. Jack Switch Cable p/n 2020–70–458 Cable Tie Pump/Motor p/n 38–51 Manifold Relay Cable Manifold...

  • Page 47: Hood And Base Assembly

    Hood and Base Assembly Assembly part number 2020–1–310 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 42 & 43) Base Ass’y, Electrical 29–7 Dual Lock 2010–1–101 Label, Foot End 29–9 Dual Lock 2020–1–135 Label, Brake/Steer, Head 4–8 Soc.

  • Page 48: International Hood And Base Assembly

    International Hood and Base Assembly Assembly part number 2020–1–900 (reference only) NOTE: 2020–1–900 replaces 2020–1–310 Hood & Base Assembly for international beds only.
  • Page 49 International Hood and Base Assembly...
  • Page 50 International Hood and Base Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 44 & 45) Base Ass’y, Electrical 29–7 Dual Lock 2020–220–517 Hood, Modified 29–9 Dual Lock 2020–220–511 Transformer Encl. 2020–1–423 Connector 2020–220–512 Transformer 52–721 Strain Relief 2020–220–513...

  • Page 51: Litter Assembly, Electrical

    Litter Assembly, Electrical Assembly part number 2020–1–511 (reference only) p/n 2020–2–673 Lift/Trend. In–Rail Patient Control Control Assembly Cable p/n 2020–90–810 p/n 34–22 Loop–Type p/n 52–110 Cable Ass’y for Gatch/Fowler Clamp Clamp In Rail Control p/n 2020–88–825 Used when patient control in–rail option is ordered.

  • Page 52: Litter Assembly

    Basic Litter Assembly Assembly part number 2020–1–513 (reference only)
  • Page 53 Basic Litter Assembly MOTOR WIRE ROUTING LITTER CONTROL BOARD CONNECTIONS...
  • Page 54 Basic Litter Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 73) Gatch Assembly 52–91 Strain Relief Fowler Assembly 52–98 Cable Clamp 2020–16–527 Hd./Ft. Bd. Pad 16–11 Flexlock Nut 13–32 Ext. Tooth Lock Washer 14–3 Graphite Washer 2020–2–657 Litter Grd.

  • Page 55: Litter Assembly, Basic Bed

    Litter Assembly, Basic Bed Assembly part number 2020–49–510 (reference only) CABLE ROUTING DETAIL...
  • Page 56 Litter Assembly, Basic Bed Item Part No. Part Name Qty. (page 69) Frame End Assembly 2020–15–512 Bumper, Coated 2020–15–515 Frame End 3–97 Hex Hd. Cap Screw 2020–2–639 Ft. End Keypad & Disp. Cable 2020–16–553 Crosstube Ass’y, Foot End 2020–1–519 Crossbar, Head End 23–25 Self–Tapping Screw 958–1–576...

  • Page 57: Litter Assembly, Position Option

    Litter Assembly, Position Option Assembly part number 2020–50–510 (reference only) CABLE ROUTING DETAIL...
  • Page 58 Litter Assembly, Position Option Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 69) Frame End Ass’y 52–45 DU Bushing 2020–15–512 Bumper, Coated (page 50) Litter Ass’y, Electrical (page 72) Frame End 1–71 Flat Hd. Soc. Screw 2020–2–643 Head End Keypad Cable 16–11...

  • Page 59: Litter Assembly, Position Option W/O Head End Keypad

    Litter Assembly, Position Option, w/o Head End Keypad Assembly part number 2020–51–510 (reference only) CABLE ROUTING DETAIL...
  • Page 60 Litter Assembly, Position Option, w/o Head End Keypad Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 69) Frame End Ass’y 52–45 DU Bushing 2020–15–512 Bumper, Coated (page 50) Litter Ass’y, Electrical 2020–15–515 Frame End 1–71 Flat Hd.

  • Page 61: Litter Assembly, All Options

    Litter Assembly, All Options Assembly part number 2020–52–510 (reference only) ORIENTATION OF POT CLAMP AND SCREW HEAD END FRAME ASSEMBLY ELECTRICAL...
  • Page 62 Litter Assembly, All Options Fowler Sensor Cable p/n 2020–2–652 Head Keypad Cable Foot Keypad Cable p/n 2020–2–643 High/Low Control Cable p/n 2020–2–639 p/n 2020–90–813 Scale Cable Trend. Sensor Ass’y High/Low Control Cable p/n 2020–2–637 p/n 2020–2–654 p/n 2020–90–813 LITTER CONTROL BOARD/WEIGH BOARD CONNECTIONS To Connector on Switch Board Rt.
  • Page 63 Litter Assembly, All Options Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 72) Frame End Ass’y 2020–53–520 Pot. Housing 2020–59–411 Cover 23–25 Self–Tapping Screw (page 72) Frame End Ass’y, Head 988–2–708 Caution Label 2020–2–629 Ground Wire 2020–2–654 Trend.
  • Page 64 Notes...

  • Page 65: Litter Assembly, All Options W/O Head End Keypad

    Litter Assembly, All Options, without Head End Keypad...
  • Page 66 Litter Assembly, All Options, without Head End Keypad Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 72) Frame End Ass’y 2020–53–520 Pot. Housing 2020–15–512 Bumper, Coated 23–25 Self–Tapping Screw 2020–15–515 Frame End Ass’y 988–2–708 Caution Label 2020–2–629 Ground Wire 2020–2–654...

  • Page 67: Litter Assembly, Scale Option

    Litter Assembly, Scale Option Assembly part number 2020–59–510 (reference only) HEAD END FRAME ASSEMBLY, ELECTRICAL...
  • Page 68 Litter Assembly, Scale Option CABLE ROUTING DETAIL LITTER CONTROL BOARD/WEIGH BOARD CONNECTIONS...
  • Page 69 Litter Assembly, Scale Option Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 71) Frame End Ass’y 2020–1–554 Wire Guide 2020–15–512 Bumper, Coated 16–11 Fiberlock Hex Nut 2020–15–515 Frame End 34–196 Male Connector 16–15 Fiberlock Nut 13–17 Ext.

  • Page 70: Frame End Assembly, Basic

    2020–49–550 Basic Frame End Assembly Item Part No. Part Name Qty. 2020–15–517 Frame End, Basic 2020–2–675 Switch Bd., Basic 2020–15–530 Ft. Ctrl. Label, Basic 2020–1–566 Clear Shield 2020–1–192 Lockout Switches Label 2020–1–144 O2 Hazard Label 1–70 Flat Hd. Mach. Screw 52–90 Spacer 16–51...

  • Page 71: Frame End Assembly, All Options

    2020–52–550 Frame End Assembly, All Options Item Part No. Part Name Qty. 2020–15–525 Frame End, All Options 2020–2–615 Control Board, Position Option 2020–57–512 LCD/Display Keypad Board 2020–15–527 Foot Control Label, All Options 2020–1–566 Clear Shield 2020–1–144 O2 Hazard Label 2020–1–146 Scale Label 1–70 Flat Hd.

  • Page 72: Frame End Assembly, Scale Option

    2020–59–550 Frame End Assembly, Scale Option Item Part No. Part Name Qty. 2020–15–519 Frame End, Basic 2020–2–675 Switch Board 2020–57–512 LCD/Display Keypad Board 2020–15–529 Ft. Ctrl. Label, Scale Option 2020–1–566 Clear Shield 2020–1–144 O2 Hazard Label 2020–1–146 Scale Label 2020–1–192 Lockout Switch Label 1–70 Flat Hd.

  • Page 73: Frame End Assembly, Procedural (Head End)

    2020–51–550 Frame End Assembly, Procedural (Head End) Item Part No. Part Name Qty. 2020–15–521 Frame End, Procedural 2020–2–617 Procedural Keyboard 2020–2–624 Head End Procedural Label 2020–1–566 Clear Shield 1–70 Flat Hd. Mach. Screw 52–90 Spacer 16–51...

  • Page 74: Knee Gatch Assembly

    Knee Gatch Assembly Assembly part number 2020–34–750 (reference only) Item Part No. Part Name Qty. 2020–34–753 Thigh Section Assembly (page 74) Calf Section Assembly 393–53–20 Strap Anchor 4–51 Soc. Hd. Cap Screw 460–4–32 Grounding Cable 14–3 Flat Washer 16–11 Fiberlock Nut 13–10 Ext.

  • Page 75: Calf Section Assembly

    2020–34–760 Calf Section Assembly Item Part No. Part Name Qty. 2020–34–755 Calf Section Assembly 2020–34–758 Calf Section Rest 16–3 Fiberlock Nut 25–77 Pop Rivet 2020–34–762 Gatch Stand Assembly 16–16 Fiberlock Nut 14–2 Nylon Washer 3–3 Hex Hd. Cap Screw 2–36 Rd.

  • Page 76: Knee Gatch Crankscrew Assembly

    2020–34–775 Knee Gatch Crankscrew Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 2020–1–528 Crank Coupler Hsg. Ass’y 1 26–149 Roll Pin 2020–1–526 Crank Coupler 26–179 Spiral Pin 2020–1–524 Crank Spring Button 2020–1–531 Crank Handle 38–209 Compression Spring 958–34–717 Magnet...

  • Page 77: Fowler Crankscrew Assembly

    2020–31–675 Fowler Crankscrew Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 2020–1–528 Crk. Coupler Hsg. Ass’y 2020–1–531 Crank Handle 2020–1–526 Crank Coupler 958–34–717 Magnet 2020–1–524 Crank Spring Button 2020–16–521 Crank Knob 38–209 Compression Spring 2020–31–676 Linear Actuator 28–88 Snap Ring...

  • Page 78: Siderail Assembly, Fold-To-Head

    2020–26–815 Siderail Assembly, Fold–to–Head HEAD END Item Part No. Part Name Qty. 938–1–188 Top Rail 37–42 Round Hole Plug 25–61 Semi–Tubular Rivet 958–26–17 Upright 2020–28–815 Lock Spindle 2020–90–865 Pivot 946–26–29 Siderail Latch Assembly 1–22 Flat Hd. Mach. Screw 2020–26–816 Spacer 2020–26–817 Pivot Bar...

  • Page 79: Siderail And Bumper Assembly, Fold-To-Head

    Siderail and Bumper Assembly, Left, Fold–to–Head Assembly part number 2020–26–810 (reference only) HEAD END Item Part No. Part Name Qty. (page 77) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 11–3 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd. Cap Screw 958–26–821 Bumper, Left 988–1–576...
  • Page 80 Siderail and Bumper Assembly, Right, Fold–to–Head Assembly part number 2020–26–811 (reference only) HEAD END Item Part No. Part Name Qty. (page 77) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 11–3 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd. Cap Screw 958–26–820 Bumper, Right 988–1–576...

  • Page 81: Siderail Assembly, Fold-To-Foot

    2020–27–812 & 813 Siderail Ass’y, Lt. & Rt., Fold Foot FOOT END Item Part No. Part Name Qty. 938–1–188 Top Rail 37–42 Round Hole Plug 25–61 Semi–Tubular Rivet 958–26–17 Upright 2020–28–815 Lock Spindle 2020–90–865 Pivot 946–26–29 Siderail Latch Assembly 1–22 Flat Hd.

  • Page 82: Siderail And Bumper Assembly, Fold-To-Foot

    Siderail and Bumper Assembly, Left, Fold–to–Foot Assembly part number 2020–27–810 (reference only) FOOT END Item Part No. Part Name Qty. (page 80) Siderail Assembly 14–19 Washer 16–11 Flex Lock Nut 11–3 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd. Cap Screw 958–26–821 Bumper, Left 988–1–576...
  • Page 83 Siderail and Bumper Assembly, Right, Fold–to–Foot Assembly part number 2020–27–811 (reference only) FOOT END Item Part No. Part Name Qty. (page 80) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 11–3 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd. Cap Screw 958–26–820 Bumper, Right 988–1–576...

  • Page 84: Siderail Assembly, Split

    2020–28–812 Split Folddown Siderail Assembly Item Part No. Part Name Qty. 2020–28–816 Top Rail, Front 2020–28–825 Top Rail, Rear 2020–28–815 Lock Spindle 958–26–17 Upright 2020–28–818 Front Spindle 946–26–29 Siderail Lock Assembly 2020–90–865 Pivot 2020–26–817 Pivot Bar 1–22 Flat Hd. Mach. Screw 37–43 Siderail Endplug 25–61...

  • Page 85: Siderail And Bumper Assembly, Split

    Siderail and Bumper Assembly, Split, Left Assembly part number 2020–28–810 (reference only) HEAD END Item Part No. Part Name Qty. (page 83) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 11–3 Washer 3–88 Hex Hd. Cap Screw 3–1 Hex Hd. Cap Screw 958–26–821 Bumper, Left 988–1–576...
  • Page 86 Siderail and Bumper Assembly, Split, Right Assembly part number 2020–28–811 (reference only) HEAD END Item Part No. Part Name Qty. (page 83) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 11–3 Washer 3–88 Hex Hd. Cap Screw 3–1 Hex Hd. Cap Screw 958–26–820 Bumper, Right 988–1–576...

  • Page 87: Siderail Assembly, Fold Head, With In-Rail Control Option

    2020–86–812 Siderail Assembly, Left, Fold Head with In–Rail Control Option HEAD END Item Part No. Part Name Qty. 938–1–188 Top Rail 958–26–17 Upright 946–26–29 Siderail Lock Assembly 2020–26–817 Pivot Bar 4–49 Flat Hd. Machine Screw 25–61 Semi–Tubular Rivet 2020–26–816 Spacer 37–42 Plug (page 98)
  • Page 88 2020–86–813 Siderail Assembly, Right, Fold Head with In–Rail Control Option HEAD END Item Part No. Part Name Qty. 938–1–188 Top Rail 958–26–17 Upright 946–26–29 Siderail Lock Assembly 2020–26–817 Pivot Bar 4–49 Flat Hd. Machine Screw 25–61 Semi–Tubular Rivet 2020–26–816 Spacer 37–42 Plug (page 98)

  • Page 89: Siderail And Bumper Assembly, Fold Head, With In-Rail Control Option

    Siderail and Bumper Assembly, Left, Fold–to–Head with In–Rail Control Option Assembly part number 2020–86–810 (reference only) HEAD END Item Part No. Part Name Qty. (page 86) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 14–17 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd.
  • Page 90 Siderail and Bumper Assembly, Right, Fold–to–Head with In–Rail Control Option Assembly part number 2020–86–811 (reference only) HEAD END Item Part No. Part Name Qty. (page 87) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 14–17 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd.

  • Page 91: Siderail Assembly, Fold Foot, With In-Rail Control Option

    2020–87–812 Siderail Assembly, Left, Fold Foot with In–Rail Control Option Item Part No. Part Name Qty. 938–1–188 Top Rail 958–26–17 Upright 988–26–833 Siderail Lock Assembly 2020–86–817 Pivot Bar 4–49 Flat Hd. Mach. Screw 25–61 Semi–Tubular Rivet 2020–26–816 Spacer 37–42 Plug (page 98) Gatch/Fow.
  • Page 92 2020–87–813 Siderail Assembly, Right, Fold Foot with In–Rail Control Option Item Part No. Part Name Qty. 938–1–188 Top Rail 958–26–17 Upright 988–26–833 Siderail Lock Assembly 2020–26–817 Pivot Bar 4–49 Flat Hd. Mach. Screw 25–61 Semi–Tubular Rivet 2020–26–816 Spacer 37–42 Plug (page 98) Gatch/Fow.

  • Page 93: Siderail And Bumper Assembly, Fold Foot, With In-Rail Control Option

    Siderail and Bumper Assembly, Left, Fold–to–Foot with In–Rail Control Option Assembly part number 2020–87–810 (reference only) HEAD END Item Part No. Part Name Qty. (page 90) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 14–17 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd.
  • Page 94 Siderail and Bumper Assembly, Right, Fold–to–Foot with In–Rail Control Option Assembly part number 2020–87–811 (reference only) HEAD END Item Part No. Part Name Qty. (page 91) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 14–17 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd.

  • Page 95: Split Siderail Assembly, With In-Rail Control Option

    2020–88–812 Split Siderail Assembly, Left with In–Rail Control Option Item Part No. Part Name Qty. 2020–28–816 Top Rail, Front 2020–28–825 Top Rail, Rear 2020–28–815 Lock Spindle 958–26–17 Upright 2020–28–818 Front Spindle 946–26–29 Siderail Lock Assembly 2020–26–817 Pivot Bar 1–22 Flat Hd. Machine Screw 37–43 Siderail End Plug 25–61...
  • Page 96 2020–88–813 Split Siderail Assembly, Right with In–Rail Control Option Item Part No. Part Name Qty. 2020–28–816 Top Rail, Front 2020–28–825 Top Rail, Rear 2020–28–815 Lock Spindle 958–26–17 Upright 2020–28–818 Front Spindle 946–26–29 Siderail Lock Assembly 2020–26–817 Pivot Bar 1–22 Flat Hd. Machine Screw 37–43 Siderail End Plug 25–61...

  • Page 97: Siderail And Bumper Assembly, Split, With In-Rail Control Option

    Siderail and Bumper Assembly, Left, Split with In–Rail Control Option Assembly part number 2020–88–810 (reference only) HEAD END Item Part No. Part Name Qty. (page 94) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 14–17 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd.
  • Page 98 Siderail and Bumper Assembly, Right, Split with In–Rail Control Option Assembly part number 2020–88–811 (reference only) HEAD END Item Part No. Part Name Qty. (page 95) Siderail Assembly 14–19 Washer 16–11 Flexlock Nut 14–17 Washer 3–88 Hex Hd. Cap Screw 3–2 Hex Hd.

  • Page 99: Gatch/Fowler Control Spindle Assembly

    2020–88–850 Gatch/Fowler Control Spindle Full Siderail Item Part No. Part Name Qty. 2020–88–851 Control Spindle 1–90 Truss Hd. Machine Screw 2020–88–855 Patient Control Assembly 2020–90–860 Pivot, Slotted...
  • Page 100 2020–88–860 Gatch/Fowler Control Spindle, Split Siderail Item Part No. Part Name Qty. 2020–88–861 Control Spindle 1–90 Truss Hd. Machine Screw 2020–88–855 Patient Control Assembly 2020–90–860 Pivot, Slotted...

  • Page 101: Lift/Trend Control Spindle Assembly

    2020–90–850 Lift/Trend. Control Spindle Assembly Item Part No. Part Name Qty. 2020–88–851 Control Spindle 1–90 Truss Hd. Machine Screw 2020–90–855 Patient Control Assembly 2020–90–860 Pivot, Slotted...

  • Page 102: Patient Control Assembly

    2020–85–100 Single Patient Control Assembly 2020–85–110 Dual Patient Control Assembly SPLIT SIDERAILS PATIENT CONTROL SWITCH CORD WIRING DETAIL FOLDDOWN SIDERAILS Item Part No. Part Name Qty. 2020–85–875 Patient Control Assembly 16–3 Fiberlock Nut 4–85 Soc. Hd. Cap Screw 34–22 Loop Type Clamp 2020–85–828 Adaptor Cable (when req’d)

  • Page 103: Head Extension/Fowler Assembly

    2020–62–10 Optional Head Extension/Fowler Assembly Item Part No. Part Name Qty. 2020–62–28 Fowler Skin 2020–62–12 Fowler Weldment (page 103) Head Extension Assembly 2020–66 6” Head Mattress (not shown) 2020–64 4” Head Mattress (not shown)

  • Page 104: Head Extension Assembly

    2020–62–14 Optional Head Extension Assembly Item Part No. Part Name Qty. 2020–62–25 Head Extension Skin 2020–62–15 Support Arm Assembly 2–56 Round Hd. Screw 11–1 Flat Washer 16–2 Fiberlock Nut 7900–1–102 Velcro Pile Tape 37–75 Hole Plug 2020–62–31 Label 2020–64 2” Mattress (not shown) 2020–66 4”...

  • Page 105: Folding I.v. Holder Assembly

    958–224–100 Permanent, Folding I.V. Holder Assembly Assembly part number 958–224–10 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. 946–224–1 Hanger 958–224–11 Label 14–16 Washer 958–224–21 Adhesive Pad 26–147 Groove Pin 21–107 Set Screw 946–224–2 Top Bracket, Mach’d 2020–19–518 I.V.

  • Page 106: Isolated I.v. Socket Assembly, Standard I.v. Pole

    2020–78–511 Isolated I.V. Socket Ass’y, Std. or Perm. I.V. Pole Item Part No. Part Name Qty. 2020–77–511 Isolated I.V. Assembly 2020–77–524 Label 2020–77–520 Socket Insert Ass’y 721–32–49 Bumper Roller 21–131 Set Screw 8–35 Shoulder Bolt (page 106) I.V. Pole Assembly 1015–24–35 Retaining Pin 11–14...

  • Page 107: Permanent, Isolated I.v. Pole Assembly

    2020–78–525 Permanent, Isolated I.V. Pole Assembly Item Part No. Part Name Qty. 1510–59–15 Base Tube Assembly 926–400–31 Extension Tube Assembly 1210–110–46 Back–Up Ring 1210–110–47 Lock Ring 1210–110–49 Lock Actuator 14–20 Nylon Flat Washer 1010–59–16 I.V. Hook 52–17 Nylon Spacer 8–31 Shoulder Bolt 2020–78–516 I.V.
  • Page 108 2020–30–210 Oxygen Bottle Holder Mounting Assembly Item Part No. Part Name Qty. (page 108) Bottle Holder Assembly 2020–30–221 Adhesive Mat 3–79 Hex Hd. Cap Screw 16–16 Nylock Hex Nut 13–10 Washer...

  • Page 109: Oxygen Bottle Holder Assembly

    2020–30–220 Oxygen Bottle Holder Assembly Item Part No. Part Name Qty. 2020–30–215 Bottle Holder Assembly 2020–30–211 Pivot Support 26–10 Roll Pin 38–221 Compression Spring 2020–30–217 O2 Bottle Label, Left 2020–30–218 O2 Bottle Label, Right...

  • Page 110: Defibrillator Tray Assembly

    2020–39–510 Optional Defibrillator Tray Assembly Item Part No. Part Name Qty. 2020–39–535 Defibrillator Tray 2020–39–521 Leg Assembly, Left 2020–39–520 Leg Assembly, Right 2020–39–513 Label 26–14 Roll Pin 946–1–283 Weight Label 390–57–12 Long Strap 1010–50–21 Short Strap 350–2–24 Collar 2020–39–530 Support Tube Assembly 29–8 Dual Lock 29–10...

  • Page 111: Foot Extension/Defibrillator Tray Assembly

    2020–139–510 Foot Extension/Defibrillator Tray Ass’y Item Part No. Part Name Qty. 2020–139–551 Foot Board (Defib.) 2020–139–525 Foot & Tray Board 1998–139–511 Right Hinge Assembly 1998–139–512 Left Hinge Assembly 4–176 Button Head Cap Screw 1010–50–48 28–95 Retaining Ring 1010–50–50 Knob 38–239 Spring 1010–50–57 Tray Label...

  • Page 112: Foley Bag Holder Assembly

    2020–72–100 Foley Bag Holder Replacement Kit NOTE: Drawings represent foot end of bed. Bed will have either a crosstube or a crossbar. 1. Item J Spacer used with load cell option only. 2. These parts are used with older style ICU beds. Item Part No.

  • Page 113: Fowler X-Ray Cassette Assembly

    2020–55–10 Optional Fowler X–Ray Cassette Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 938–20–13 Cassette Holder 16–14 Self–Locking Nut 1–58 Flat Hd. Machine Screw 2–10 Round Hd. Mach. Screw 938–20–20 Channel Top Assembly 2020–55–19 Bearing Housing 11–63 Washer 926–23–62...

  • Page 114: Fowler X-Ray Cassette Retro-Fit Assembly

    2020–54–11 Fowler X–Ray Cassette Retro–Fit Assembly Item Part No. Part Name Qty. 23–55 Self–Tapping Sheet Metal Screw 2020–55–21 Fowler Tab Assembly 2020–55–24 Pivot Assembly, Right 4–6 Soc. Hd. Cap Screw 2020–55–25 Pivot Assembly, Left 2020–54–101 X–Ray Cass. Drill Jig (not shown)
  • Page 115 2020–250–410 Integrated Dynamic Mattress System Assembly...
  • Page 116 AM Lockout Switch Assembly p/n 2020–250–615 Integrated Mattress Ass’y Pendant Control Ass’y, Right p/n 2500–900–202 p/n 2020–250–825 24V Umbilical Cable Ass’y Right Pendant Ext. Cord Ass’y p/n 2020–250–612 p/n 2020–250–614 Int. DMS Cable Ass’y p/n 2020–250–616 24V Litter Cable Ass’y To JP1 To JP 3 p/n 2020–250–613...

  • Page 117: Integrated Dynamic Mattress System Assembly

    2020–250–410 Integrated Dynamic Mattress System Assembly Head/Foot Board Support Side Tube Locked Out Auto On AUTO/MANUAL SWITCH DETAIL DETAIL OF INTERFACE BOARD MOUNTING Item Part No. Part Name Qty. 2020–250–522 Pocket Cover, Left 2020–250–524 Pocket Cover Ass’y, Rt. 2020–250–518 Label, Auto/Manual 2020–250–527 Label, Fuse/Warning 2020–250–611...

  • Page 118: Dynamic Mattress System Control Spindle Assembly

    2020–250–825 Dynamic Mattress System Cont. Spindle Ass’y Plug Wiring Detail Item Part No. Part Name Qty. 2020–88–851 Control Spindle 1–90 Truss Hd. Mach. Screw 2020–250–820 Int. DMS Control Ass’y 2020–90–860 Pivot, Slotted...

  • Page 119: Integrated Dynamic Mattress Assembly

    2500–000–000 ICU Integrated DMS Mattress Assembly Item Part No. Part Name Qty. 2500–320–000 Mattress Cover, Nylon 2500–320–100 Mattress Cover, Pink 2500–320–200 Mattress Cover, Lectrolite 2500–900–23 Strain Relief 2500–900–28 Hole Plug 2500–201–210 Foam Base 2500–200–300 Air Bladder Assembly 2500–920–105 DMS I.D. Label 2500–400–123 Control Unit Assembly 2500–201–120...

  • Page 120: Infustion Pump Mounting Assembly

    2020–23–510 Infusion Pump Mounting Assembly Item Part No. Part Name Qty. 958–1–224 I.V. Clip 4–57 Hex Soc. But. Hd. Cap Screw 16–27 Kep Nut 946–1–109 Adhesive Pad 2020–23–515 Infusion Pump Holder...

  • Page 121: Warranty

    Warranty Limited Warranty: Stryker Medical Division, a division of Stryker Corporation, warrants to the original purchaser that its products should be free from defects in material and workmanship for a period of one (1) year after date of delivery. Stryker’s obligation under this warranty is expressly limited to supplying replacement parts and labor for, or replacing, at its option, any product which is, in the sole discretion of Stryker, found to be defective.

  • Page 122: Return Authorization

    Claims for any short shipment must be made within thirty (30) days of invoice. International Warranty Clause: This warranty reflects U.S. domestic policy. Warranty outside the U.S. may vary by country. Please contact your local Stryker Medical representative for additional information.
  • Page 123 6300 Sprinkle Road, Kalamazoo, MI 49001 DH 2/00 2020–1–152 REV K...

Table of Contents