Movement Speed; Length And Angle Sensors - Haulotte HA12PX Operator's Manual

12 to 26m engine-powered articulated lifts
D
- Operating principle

2.3 - MOVEMENT SPEED

Movement speed of the following elements is regulated by the movement speed selector :
• Jib lifting / rotation.
• Platform rotation / compensation.
Movement speed depends on the user's decisions according to the environment.
N.B.-:-T
O ADJUST THE SPEED OF THE OTHER MOVEMENTS
.
BE USED
Except HA12PX (NA) :
Movement speed of the following elements is regulated by the movement speed selector :
• Jib lifting / rotation.
• Platform rotation / compensation.
Movement speed depends on the user's decisions according to the environment.
N.B.-:-T
O ADJUST THE SPEED OF THE OTHER MOVEMENTS
.
BE USED

2.4 - LENGTH AND ANGLE SENSORS

For reasons of stability and work area management, the boom is equipped with length and
angle sensors.
These length and angle sensors transmit data allowing the controller to manage the automatic
operation of the combined movements.
Operating rules for HA260PX (HA80JRT)
In certain configurations :
• When a control is activated to lower the arm, the system organises the combination of movements
required to lower the boom.
• When a control is activated to lower the boom, the system organises the combination of movements
required for boom telescoping.
62 24203 3237 0
,
THE PROPORTIONALITY OF THE JOYSTICKS MUST
,
THE PROPORTIONALITY OF THE JOYSTICKS MUST
E 09 07 EN