Machine Specifications; Movement Speed - Haulotte HA26 RTJ O Maintenance Book

HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW -
HA80 RTJ O - HA80 RTJ PRO
C
- Familiarization

5 - Machine specifications

5.1 - M
OVEMENT SPEED
To allow checking operation, refer to the following table about originally time per movement. If the
values measured by test are not equal to the following :
• Do not use the machine.
• Setting updating is needed.
Always check speed movement from the ground control box.
Low drive speed
High drive speed
Maximum towing speed
Time for telescopic boom extension
Time for telescopic boom retraction
Time for raising boom
Time for descent boom
Time for continue turntable rotation
Time for complete left / right cage rotation
Time for arm lifting
Time for descent arm
Time for jib lifting
Time for jib descent
Time for raising compensation
Time for lowering compensation
Stop point to stop point steering
102 4001055180
HA26 RTJ O - HA80 RTJ O HA26 RTJ PRO - HA80 RTJ PRO
1,2 km/h / 0.7 mph
5 km/h / 3.1 mph
5 km/h / 3.1 mph
33 s +/-3 (per 1/2 rotation)
E 06.21
60 s +/-5
60 s +/-5
44 s +/-4
44 s +/-4
22 s +/-3
50 s +/-5
50 s +/-5
30 s +/- 3 s
30 s +/- 3 s
15 s +/- 2 s
15 s +/- 2 s
5 s +/- 1 s
USA / GB