Ansi Standard Specificities; Overload Test - Haulotte HA12PX Operator's Manual

12 to 26m engine-powered articulated lifts
G
- Technical characteristics

4 - ANSI standard specificities

The following tests must be performed after :
• A major technical intervention.
• An accident due to major component failure on the machine.
• The following tests must be performed by a qualified person under safe conditions.
• The results must be fully recorded.
To avoid the machine tipping over, it must be attached during the test (chains, anchor point).

4.1 - OVERLOAD TEST

The overload test is at 125% of the nominal load. See paragraph 1.12.3 of standard
AS1418.10-1996 for test details.
L o a d t a b l e
Machine
HA12PX (HA33JRT)
HA16X
HA16PX (HA46JRT)
HA18PX (HA51JRT)
HA16SPX (HA46SJRT)
HA18SPX (HA51SJRT)
HA20PX (HA61JRT)
HA20PX (HA61JRT)-Option
HA260PX (HA80JRT)
The machine must not show any signs of permanent distortion.
Tests are performed by a qualified person under optimal conditions and results must be fully recorded.
122 24203 3237 0
Test load
Pound (lb) Kilogramme (kg)
633,8
633,8
633,8
633,8
633,8
633,8
633,8
688,9
633,8
E 09 07
287,5
287,5
287,5
287,5
287,5
287,5
287,5
312,5
287,5
EN