Controller Head; Detection Of Internal Fault; Automatic Engine Cut-Out; Load In The Platform - Haulotte HA12PX Operator's Manual

12 to 26m engine-powered articulated lifts
D
- Operating principle

2.5 - CONTROLLER HEAD

The machines are equipped with a specific controller configured for the machine
functionalities.
Do not interchange the controller between machines.

2.6 - DETECTION OF INTERNAL FAULT

N.B.-:-T
HE PRESENCE OF THIS DEVICE DEPENDS ON THE MACHINE CONFIGURATION
The defect LED blinks to indicate an internal malfunction.
The machine switches to downgraded mode.
Certain movements can be limited or forbidden to preserve the operator's safety.

2.7 - AUTOMATIC ENGINE CUT-OUT

The engine automatically cuts out in the following conditions :
• The alternator is not functioning.
• Engine temperature is too high.
• Oil pressure is too low.
• A machine malfunction is detected.
For equipped machines(HA260PX (HA80JRT)) : :
• The platform has gone outside the work area.

2.8 - LOAD IN THE PLATFORM

If the load in the platform is more than the maximum authorized load, no
movement is possible from the upper console.
The platform overload LED and the buzzer warn the operator.
2 possibilities to restore normal configuration :
• Remove some weight from the platform to return to an acceptable load.
• Use the lower console to lower the platform.
N.B.-:-A
LL THE MOVEMENTS ARE SLOWED DOWN
24203 3237 0
.
E 09 07
.
EN 63
A
B
C
D
E
F
G
H
I