Torque Instructions; Torque Sequence - VERDER Verderair VA-E80 Repair Parts

Torque Instructions

Torque Instructions Instructions
Torque Torque Instructions
If fluid cover or manifold fasteners have been
loosened, it is important to torque them using the
following procedure to improve sealing.
NOTE: Fluid cover and manifold fasteners have a
NOTE: NOTE:
thread-locking adhesive patch applied to the threads.
If this patch is excessively worn, the fasteners may
loosen during operation. Replace screws with new
ones or apply medium-strength (blue) thread locker
to the threads.
Torque

Torque Sequence

Torque Sequence Sequence
Aluminum Pumps Pumps
Aluminum Aluminum Pumps
Torque bolts to 74.6–81.3 N•m (55-60 ft-lb)
1. Left/Right Fluid Covers
SIDE VIEW
20
NOTE: Always completely torque fluid covers before NOTE: NOTE:
torquing manifolds.
1. Start all fluid cover screws a few turns. Then, turn
2. Turn each screw by 1/2 turn or less working in a
3. Repeat for manifolds.
2. Inlet Manifold
BOTTOM VIEW
down each screw just until head contacts cover.
crisscross pattern to specified torque.
3. Outlet Manifold
TOP VIEW
859.0635