Table of Contents
Advertisement
3.
Safety
The manufacturer does not accept any liability
for damage resulting from disregard of this
documentation.
3.1 Intended use
Only use the pump to handle compatible fluids as
X
recommended by the manufacturer (g11. Technical
specifications).
Adhere to the operating limits.
X
Consult the manufacturer regarding any other use of the
X
pump.
Pumps delivered without a motor must be fitted with a
X
motor in accordance with the provisions of EC Machinery
Directive 2006/42/EC.
Prevention of obvious misuse (examples)
Note the operating limits of the pump with regard to
X
temperature, pressure, flow rate and motor speed (g11.
Technical specifications).
Do not operate the pump with any inlet/outlet valves
X
closed
Only install the pump as recommended in this manual.
X
For example, the following are not allowed:
–
Installing the pump without proper support.
–
Installation in the immediate vicinity of extreme hot or
cold sources.
3.2 General safety instructions
Observe the following regulations before carrying
out any work.
3.2.1 Product safety
•
These
operating
information
which
installation, operation and maintenance. Therefore, this
operating manual must be read and understood both by the
installing personnel and the responsible trained personnel
/ operators prior to installation and commissioning, and it
must always be kept easily accessible within the operating
premises of the machine.
•
Not only must the general safety instructions laid down
in this chapter on "Safety" be complied with, but also the
safety instructions outlined under specific headings.
•
Operate the pump only if it and all associated systems are
in good functional condition.
•
Only use the pump as intended, fully aware of safety and
risk factors involved and the instructions in this manual.
•
Keep this manual and all other applicable documents
complete, legible and accessible to personnel at all times.
•
Refrain from any procedure or action that would pose a risk
to personnel or third parties.
•
In the event of any safety-relevant faults, shut down the
pump immediately and have the malfunction corrected by
qualified personnel.
•
The installation of the pump must comply with the
Original instructions (en)
instructions
contain
fundamental
must
be
complied
with
© Verder Liquids B.V
Dura 55 series - Operating manual
requirements of installation given in this manual and any
local, national or regional health and safety regulations.
3.2.2 Obligation of the operating company
Safety-conscious operation
•
Ensure
that
observed and monitored:
–
Adherence to intended use
–
Statutory or other safety and accident-prevention
regulations
–
Safety
hazardous substances if applicable
–
Applicable standards and guidelines in the country
where the pump is operated
•
Make personal protective equipment available pertinent to
operation of the pump.
Qualified personnel
•
Ensure that all personnel tasked with work on the pump
have read and understood this manual and all other
applicable
maintenance and repair information, prior to use or
installation of the pump.
•
Organize responsibilities, areas of competence
the supervision of personnel.
•
Have all work carried out by specialist technicians
only.
•
Ensure
that
supervision of specialist technicians at all times when
working with the pump.
Safety equipment
Provide the following safety equipment and verify its
functionality:
•
For hot, cold and moving parts: safety guarding should be
provided by the operating company.
•
For potential build-up of electrostatic charge: ensure
during
appropriate grounding if and when required.
Warranty
The warranty is void if the customer fails to follow any
Instruction, Warning or Caution in this document. Verder has
made every effort to illustrate and describe the product in this
document. Such illustrations and descriptions are however,
for the sole purpose of identification and do not express or
imply a warranty that the products are merchantable or fit for a
particular purpose, or that the products will necessarily conform
to the illustration or descriptions.
Obtain the manufacturer's approval prior to carrying out any
modifications, repairs or alterations during the warranty period.
Only use genuine parts or parts that have been approved by
the manufacturer.
For further details regarding warranty, refer to terms and
conditions.
Version 01
the
following
safety
regulations
governing
the
documents,
including
trainee
personnel
are
aspects
are
handling
of
the
safety,
and
under
the
8 | Page
Advertisement
Chapters
Table of Contents
Troubleshooting
