Lanner NCA-5210 User Manual page 46

2. Hold the chassis with its front facing you, lift and gently insert it by aligning with the slide-rail assemblies
as shown in the image, and then push the unit into the cabinet.
3. Keep sliding the rails in until they stop about halfway. Press down the metal clips on bother inner channels
and push them further into the cabinet.
4. To have the chassis completely inserted into the rack, pull and hold the Rail Lock tab on both brackets
while pushing in the chassis.
To detach the chassis from the rack, pull the Release Tabs on both sides of the brackets towards you while
gently sliding the chassis out.
Press down the metal
clips while pushing in.
Release Tab
46
Rail Lock