Lanner NCA-5210 User Manual page 36

The system supports 1 x 3.5" or 2 x 2.5" SATA HDDs or SSDs as data storage. Please follow the steps below
for installation.
1. Remove the 4 screws that secure the disk drive tray.
2. Remove the tray and mount the hard disk on the tray using the provided disk screws.
3.5" SATA HDD/SSD
SATA
SATA
Data Connector
Power Connector
2.5" SATA HDD/SSD
SATA SATA
Power Connector Data Connector
36