Adjusting The Sensitivity Of The Controllers; Adjusting The Sensitivity Of The Xy Pad And D Beam - Edirol CG-8 User Manual

Adjusting the sensitivity of the controllers

Adjusting the sensitivity of the XY pad and D Beam

When using the XY pad or the D Beam, here's how to specify the size of the area in
which your operations will be detected by the controller.
fig.front25.e.eps
1
From Play mode (p. 49), press the [CONTROLLER ASSIGN] button.
2
Press the [DEPTH] button.
The button will light, and the Bank area of the display panel will blink "–".
fig.display20.eps
3
Choose the controller whose sensitivity you want to adjust.
• To choose the XY pad:
Move your finger on the X-axis or X-axis of the XY pad.
• To choose the D Beam:
Place your hand above either the left or right sensor of the D Beam.
D Beam
[D-BEAM] indicators
[DEPTH] button
[CONTROLLER ASSIGN] button
[XY PAD ACTIVE] indicator
XY pad
99