Selecting A Stamp Picture - Edirol CG-8 User Manual

Selecting a Stamp Picture

Here's how to select the Stamp Picture you will use.
1
Make sure that the [STAMP PATCH] pad is lit, and press the [PICTURE] pad.
The [PICTURE] pad and visual pads [1]–[16] to which a Stamp Picture is assigned will
light.
The display panel indicates the bank and number of the currently selected Stamp
Picture.
* If you're creating the first Stamp Patch for a newly created project, Stamp Picture "1-1" will
be selected automatically.
2
Press one of the lit visual pads [1]–[16] to select a Stamp Picture.
The Stamp Picture will change. The display panel shows the bank and number of that
Stamp Picture.
3
If you want to keep your Stamp Picture settings, perform the Save operation (p. 83).
Previewing the Stamp Pictures in the screen
You can preview the Stamp Patch pictures in the screen. This is a convenient way to
find the picture you want to use.
1
Make sure that the [STAMP PATCH] pad is lit, and press the [PREVIEW] button.
The [PREVIEW] button will light, and the preview screen will appear.
fig.preview.stamp.EPS
At the same time, the [PICTURE] pad and visual pads to which a Stamp Picture is
assigned will light.
The Stamp Pictures in the screen are assigned to the visual pads of the corresponding
location.
2
Press the [PREVIEW] button once again to return to the normal patch playback
screen.
Creating patches
There are no banks for
Stamp Patches; the Bank
indication in the display
panel will always indicate
"1."
You can select Stamp
Pictures from those that
are loaded into the
currently selected project.
For details on how to load
Stamp Pictures into a
project, refer to "Editing a
project" (p. 57).
The Stamp Picture will not
change if you press a
visual pad to which no
Stamp Picture is assigned
(i.e., a visual pad that is
not lit).
75