Table of Contents
Advertisement
Various playback methods
By operating the front panel controls of the CG-8 you can "play back" images in a
variety of ways. This section explains these playback methods.
Using the XY pad to apply effects to the image
The XY pad, located on the left side of the front panel, is a controller that you operate
by touching it with your fingertip. You can use this to apply various effects to the
image.
To use the XY pad, you assign the desired effect parameter(s) to the pad, and then
control these parameters in real time to apply the effect to the image.
fig.front09.e
1
If you want to apply an effect to a Photo Patch, press the [PHOTO PATCH] pad. If
you want to apply an effect to a Stamp Patch, press the [STAMP PATCH] pad.
2
Move your finger left/right (X-axis) or up/down (Y-axis) on the XY pad. The effect
will be applied.
fig.XY.eps
When the XY pad is responding, the [XY PAD ACTIVE] indicator will light.
If you press the [HOLD] button (it will light), the effect will be maintained even if you
take your finger away from the XY pad.
36
For each patch, the choice
of parameter that will be
controlled by the XY pad
can be saved as part of the
patch settings. This lets
XY pad
you create patches that
contain the most
appropriate controller
settings. For details, refer
to "Creating patches" (p.
61).
[XY PAD ACTIVE]
indicator
[HOLD] button
For some patches or
effects, it may not be
possible to apply an effect.
For details on how to
adjust the sensitivity of the
XY pad, refer to
"Adjusting the sensitivity
of the controllers" (p. 99).
Advertisement
Table of Contents
