Table of Contents
Advertisement
Switching patches automatically (Auto Switch function)
The Auto Switch function automatically switches the Photo Patch or Stamp Patch. You
can make the patch switch at a specified speed, or at the timing of an external audio
peak detected by the Sound Control function (p. 41).
* The Auto Switch function automatically switches patches within the currently selected bank.
If you want to switch to a patch in a different bank, you'll need to switch the bank.
fig.front14.e.eps
[SPEED] indicator
1
Press the [PHOTO PATCH] pad if you want to automatically switch Photo Patches, or
press the [STAMP PATCH] pad if you want to automatically switch Stamp Patches.
2
Use the [AUTO SWITCH] switch to select how patches should be switched
automatically.
[SPEED]
[OFF]
[SOUND]
[AUTO SWITCH] switch
[SPEED] knob
Patches will switch at the speed specified by the [SPEED]
knob. The patch will switch the instant that the [SPEED] indi-
cator (located above the knob) lights. Watch the indicator
while you turn the [SPEED] knob to adjust the speed.
The Auto Switch function will be off.
Patches will switch when external audio peaks are detected
as specified by the Sound Control function. The patch will
switch the instant the [DETECTION] indicator lights.
Various playback methods
For details on how to
switch banks, refer to
"Switching banks and
selecting a Photo Patch"
(p. 32) and "Switching
banks and selecting a
Stamp Patch" (p. 33).
For details on using the
Sound Control to specify
an external audio input,
refer to "Using an
external audio input
source to control the
image (Sound Control
function)" (p. 41).
43
Advertisement
Table of Contents
