Setting the MIDI transmit/receive channel
Here's how to specify the MIDI channel used by the CG-8 for transmission and
reception.
1
Press and hold the [MENU] button for two seconds or longer; the MAIN MENU
screen will appear.
If you're in Menu mode (p. 49), for example when the PROJECT EDITOR screen or the
FILE MANAGER screen is displayed, press the [EXIT] button several times to access
the MAIN MENU screen.
fig.main-menu01.eps
2
Use the [
PREV][NEXT
the [ENTER] button.
The SYSTEM SETTINGS screen will appear.
fig.MIDI.system.eps
Using external equipment to control the CG-8
] buttons to select "SYSTEM SETTINGS," then press
Don't insert or remove a
CompactFlash card while a
menu is displayed (i.e.,
while you're in Menu
mode). Doing so may
damage the data on the
CompactFlash card.
105