Table of Contents
Advertisement
How to read this manual
The CG-8 owner's manual is organized as shown below. If you're using the CG-8 for the first time, please read
"Basic operation" (p. 26). This chapter helps you make sure that the CG-8 is correctly connected to your other
equipment, and explains basic operations, from turning on the power to playing back images.
For more details, refer to the sections listed below.
Panel Descriptions (p. 14)
This explains the CG-8's knobs, buttons, and connectors.
Before you begin (p. 18)
This explains how to use the card adaptor and CompactFlash cards.
Making the connections (p. 22)
This explains how to connect other equipment such as a television or projector to the CG-8, and various
ways in which you can use it.
Basic operation (p. 26)
This explains how to turn the power on, and describes the basic work flow on the CG-8.
Various playback methods (p. 36)
This explains the various ways in which you can play back images using the CG-8.
Learning more about the CG-8 (p. 45)
This explains concepts and terms you'll need to know when using the CG-8, and describes the operating
screens and basic structure of the CG-8.
About projects (p. 50)
This explains project-related operations, such as how to load images into the CG-8.
Creating patches (p. 61)
This explains how to create and save your own photo patches and stamp patches.
Managing projects and pictures (p. 84)
This explains how to copy/delete/rename projects or images, and how to format a CompactFlash card.
Adjusting the sensitivity of the controllers (p. 99)
This explains how to adjust the sensitivity of the XY pad and D Beam.
Using external equipment to control the CG-8 (p. 101)
This explains how you can control the CG-8 from a V-LINK compatible device or a MIDI device.
Appendix (p. 111)
This section contains an effect list, troubleshooting tips, and the CG-8's specifications.
13
Advertisement
Table of Contents
