Editing A Project; Images That You Can Use As A Photo Picture Or Stamp Picture; Assigning A Photo Picture Or Stamp Picture To A Visual Pad - Edirol CG-8 User Manual

Editing a project

This section explains how to load the pictures (Photo Pictures and Stamp Pictures) you
want to use in a project.
From the internal hard disk or a CompactFlash card via the included card adaptor, you
need to separately load the image files you want to use as Photo Pictures and Stamp
Pictures, and assign them to the visual pads.
Images that you can use as a Photo Picture or
Stamp Picture
Image files that you created on your computer or captured using a digital camera can
be used as Photo Pictures and Stamp Pictures.
You can use images saved in the following formats.
Photo Pictures
• Format: JPEG file (.jpg)
• Size: 3000 x 2000 pixels or smaller
Stamp Pictures
• Format: PNG file (.png)
• Size: 3000 x 2000 pixels or smaller
Assigning a Photo Picture or Stamp Picture to a
visual pad
1
Press and hold the [MENU] button for two seconds or longer to access the MAIN
MENU screen.
fig.main-menu01.eps
About projects
When you load an image
into a project, Photo
Pictures (JPEG files) will
be automatically resized to
512 x 384 pixels, and
Stamp Pictures (PNG files)
will be automatically
resized to 512 x 256 pixels.
Don't insert or remove a
CompactFlash card while a
menu screen is shown (i.e.,
in Menu mode). Doing so
may damage the data on
the CompactFlash card.
57