Table of Contents
Advertisement
Rear Panel
fig.rearpanel.eps
1
10
1.
POWER switch
This turns the power on.
You can press this again to turn the power off, but
before you turn the power off, make sure that the
[SHUTDOWN] button is lit red (Standby mode).
→ p. 26
2.
MIDI OUT/THRU connector, MIDI IN connector
You can connect external MIDI devices to these
connectors.
3.
Security slot (
)
You can connect a commercially available security lock
cable to this slot.
http://www.kensington.com/
4.
OUTPUT VIDEO jack
This jack outputs a video signal. You can connect it to
your television or other device used for monitoring.
→ p. 22
5.
OUTPUT S-VIDEO connector
This connector transmits an S-video signal. You can
connect it to your television or other device used for
monitoring.
→ p. 22
2
9
8
7
6.
OPTION connector
Connect the included card adaptor here.
→ p. 18
7.
OUTPUT RGB connector
Connect a display here. Use a display that provides an
analog RGB D-sub 15-pin connection at VGA (640 x 480)
resolution.
→ p. 22
8.
LINE IN L/R jacks
988
Connect an instrument or CD player to these jacks.
→ p. 22
9.
FOOT SW jack
Connect a separately available foot pedal (e.g., DP-2) or
expression pedal (e.g., EV-5) to this jack. → p. 44
10. AC IN connector
Connect the included power cord here.
Panel Descriptions
6
5
4
3
17
Advertisement
Table of Contents
