Display's Operation Explanation - Whirlpool 8LIECH-SCDSSFWL User Manual

DISPLAY'S OPERATION EXPLANATION

Cold and Hot water symbols will flash when heating and cooling are working.
The unit's display shows the current temperature of the chilled and heated water. It also
allows for temperature customization of both cold and hot water.
Adjusting temperature:
- Hold SET button until hot temperature display starts flashing.
- Touch to adjust temperature incrementally.
- Touch SET to save
- Do the same for cold-water temperature.
Temperature Range:
- Hot from 71°C/160°F to 93°C/199°F
- Cold from 4°C/39°F to 13°C/55°F
Choosing Temperature scale:
- Factory default settings are Fahrenheit.
- Press SET button until °C or °F icon flashes.
- Switch between °C and °F by touching adjust button.
- Touch SET to save.
Energy Star settings:
- Energy Star compliant default settings are factory set.
- By setting your desired temperatures you may exit the default Energy Star settings.
- To return to factory default settings unplug then re-plug power cord to reset Energy Star settings.
- By choosing the maximum cold and the maximum hot water settings you may increase power
consumption by up to 200 Watts per day.
Optimum Settings:
For optimum performance set cold water at 5.5°C/42°F and hot water at 90°C/194°F.
Self-cleaning function
- The cleaning function activates every 4 hours automatically.
Night Lights On/Off function
- To turn On/Off LED Night Lights please hold ADJUST button for 3 seconds
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-594-4755 for assistance.
Model # 8LIECH-SCDSSFWL: Page 11
SELF CLEANING
SELF CLEANING
SET
ADJUST
C C
C C