Whirlpool 8LIECH-BP-WL User Manual

Whirlpool 8LIECH-BP-WL User Manual

Hot & cold hidden bottled water cooler

Advertisement

The appearance of your product may
differ from the above illustration.
For service, call: 1-855-594-4755
Hot & Cold Hidden
Bottled Water Cooler
Model No. : 8LIECH-BP-WL
For spring water users,
please follow the ins-
tructions shown in the
"Descaling" section.
USER MANUAL
SAVE THIS MANUAL FOR
FUTURE USE
or E-mail Whirlpool@electrotemp.com
8LIECH-BP-WL PN: 5M012563XX00(E)

Advertisement

Table of Contents
loading

Summary of Contents for Whirlpool 8LIECH-BP-WL

  • Page 1 Hot & Cold Hidden Bottled Water Cooler Model No. : 8LIECH-BP-WL For spring water users, please follow the ins- tructions shown in the "Descaling" section. USER MANUAL SAVE THIS MANUAL FOR FUTURE USE The appearance of your product may differ from the above illustration.
  • Page 2: Table Of Contents

    Model # 8LIECH-BP-WL: Page 2 TABLE OF CONTENTS Safety Precautions................ Safety Precautions-Electrical Requirements ........Product Features ............... Specifications ................Parts & Features ................. Unpacking and Assembly ............Installation ................... Clean Out Of The Box, No Need For Cleaning Prior To Initial Use ........
  • Page 3: Safety Precautions

    Model # 8LIECH-BP-WL: Page 3 SAFETY PRECAUTIONS Your safety and the safety of others are very important. We have provided many important safety messages in this manual and your appliance. Always read and follow all safety messages. This is the safety alert symbol.
  • Page 4: Safety Precautions-Electrical Requirements

    Model # 8LIECH-BP-WL: Page 4 SAFETY PRECAUTIONS ---Electrical Requirements WARNING Electrical shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in serious injury, fire, or electrical shock.
  • Page 5: Specifications

    Model # 8LIECH-BP-WL: Page 5 SPECIFICATIONS Power Supply AC 120V / 60Hz / 5Amp Refrigerant Type R-134A Cold Water Power < 100Watts Cold Capacity / Hour 4 Liters / 1.06 Gallon Energy Cold Temperature 3°C - 10°C / 37.4°F - 50°F...
  • Page 6: Unpacking And Assembly

    Model # 8LIECH-BP-WL: Page 6 UNPACKING AND ASSEMBLY Remove the dispenser from packaging: WARNING Excessive Weight Hazard Use two or more people to move and install the water cooler and the bottles. Failure to do so can result in back or other injury.
  • Page 7: Clean Out Of The Box, No Need For Cleaning Prior To Initial Use

    Model # 8LIECH-BP-WL: Page 7 CLEAN OUT OF THE BOX, NO NEED FOR CLEANING PRIOR TO INITIAL USE Your water cooler is Clean Out of The Box. Cleaning described below is not required. However if you choose to clean your water cooler for any reason, please follow the instructions below.
  • Page 8: Operation

    Model # 8LIECH-BP-WL: Page 8 OPERATION IMPORTANT This unit is intended for use with high-quality bacteriologically safe bottled water only. Do NOT use other liquids. Do NOT use for other purposes. Warranty is void if unit is used with any other liquids, including tap water, coffee, tea, juices, beer, or wine.
  • Page 9 Model # 8LIECH-BP-WL: Page 9 NOTE: Fit all round bottles. When using a 5 gallon rectangular bottle, slide it into place as shown in the illustration below. • If the probe tube A and B are not sealed(see previous page), the pump will run a few minutes and the night lights will flash.
  • Page 10 Model # 8LIECH-BP-WL: Page 10 2. Press the right control downward to start dispensing water. 3. Release the control once desired fill level is achieved. Dispensing Hot Water Note: After setup, hot water will be available in 15-20 minutes. 1. Position the container you wish to fill with water securely below below the hot-water tap.
  • Page 11: Proper Care & Descaling

    Model # 8LIECH-BP-WL: Page 11 PROPER CARE & DESCALING General Cleaning Perform: As needed Time Required: 5 minutes. Note: Do NOT use abrasive materials or chemical cleaners. 1. Clean cabinet surfaces with a soft cloth and warm soapy water 2. Wipe dust from back of dispenser to improve efficiency.
  • Page 12 Model # 8LIECH-BP-WL: Page 12 d.Re-attach the drain plug and plastic cap before proceeding. 4. Fill a bucket or empty 5-gallon water bottle with solution of white vinegar. For proportions, refer to "Descaling Solutions" section. Choose quantity in accordance with the frequency of your treatments.
  • Page 13: Troubleshooting

    Model # 8LIECH-BP-WL: Page 13 TROUBLESHOOTING Call 1-855-594-4755 for service. Problem: Stainless steel surfaces are smudgy or fingerprinted. Solution: Use paper towel to wipe excess oils until surface feels dry to the touch. • To maintain beauty of stainless steel, oil it periodically using a stainless steel cleaning solution available at hardware stores, or use mineral oil (unscented baby oil).
  • Page 14 Model # 8LIECH-BP-WL: Page 14 Problem: Buttons are stuck. Solution: Apply mineral oil (unscented baby oil) to the button slides to reduce friction. Problem: No water is coming from the taps. Solution: Make sure the water bottle is not empty. If it is, replace it. If not, adjust the probe to an appropriate length.
  • Page 15: Limited Warranty

    Model # 8LIECH-BP-WL: Page 15 LIMITED WARRANTY Electrotemp Technologies Inc., (“Vendor”) warrants to the original purchaser of this dispenser, and to no other person, that if this dispenser is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in such dispenser shall be free from defects in material and workmanship.
  • Page 16 ®/™ ©2018 Whirlpool. All rights reserved. Manufactured under license by Electrotemp Technologies Inc., Mississauga, ON. Canada Limted warranty provided by manufacturer.

Table of Contents