Mitsubishi HS-U776 Owner's Manual page 60

Location of Controls
Rear Panel Jacks
VIDEO INput and OUTput jacks
Yellow jacks for receiving (IN) and sending (OUT) video
signals to a monitor TV or from another VCR.
The black jacks marked with "S-Video" can be used to
connect televisions with S-Video jacks. ("S-Video jack"
refers to a Separated Luminance-Chrominance (Y/C)
jacks that conforms to the NTSC signal.)
AUDIO INput and OUTput jacks
Red and white jacks for receiving (IN) and sending (OUT)
audio signals. Red signifies the right channel, and white
signifies the left channel. Stereo audio cables are also
color coded red and white. If you are receiving or
sending a mono (non-stereo) signal, you should use only
the left (white) terminal.
58
R AUDIO L/MONO VIDEO S-VIDEO
IN 1
OUT
R AUDIO L VIDEO S-VIDEO
ANTENNA
ACTIVE A/V NETWORK
IN OUT
IN
OUT
CONVERTER
BOX CONTROL
TIMER RESET
ACTIVE A/V NETWORK jacks
Connects the VCR to other Mitsubishi products with
Active A/V Network or A/V Network jacks.
CONVERTER BOX CONTROL jack
Connects IR Emitter to a cable box and/or satellite
receiver.
TIMER RESET
Erases all programmed recording settings and resets the
clock. Use this button with care.
ANTENNA IN jack
Attach an external antenna or cable to bring in an outside
signal.
ANTENNA OUT jack
Attach a coaxial cable to your TV to send out antenna/
cable signals from the VCR to your TV.