Mitsubishi HS-U776 Owner's Manual page 22

Setting Up Your VCR
5 Press the ADJUST buttons until the correct month appears on screen.
Press ENTER.
6 Press the ADJUST buttons to set the current year. Press ENTER.
7 Press the ADJUST buttons to set the date. Press ENTER.
8 The hour numbers and the am/pm indicator will be blinking. Press the
ADJUST buttons to set the hour and am/pm at the same time. Pressing
ADJUST + moves the clock forward; pressing ADJUST – moves the clock
backward. Press ENTER.
9 Press the ADJUST buttons to set the minutes. When you have set the
correct time, press ENTER. First Time Set-Up menu will appear, and the
clock will start running.
10 Press MENU twice to turn off the menus.
You can adjust the daylight saving time manually. When Daylight savings is
highlighted, press the ADJUST buttons to select ON or OFF.
If you select ON, the VCR will set the clock forward one hour.
If you select OFF, the VCR will set the clock back one hour.
Any time you adjust this setting, check your programmed recordings to
be sure they are set to the correct times.
If you have a Mitsubishi TV with StarSight
time on your VCR. See your TV Owner's Guide for details.
®
To allow StarSight to do this, you must set the VCR's Clock set to
MANUAL, and the VCR's A/V Network setting to ACTIVE.
®
StarSight is a registered trademark of StarSight Telecast, Inc.
20
IMPORTANT
IMPORTANT
® feature, the TV can set the
≈Set the clock
ƒDaylight savings (OFF)
ƒMonth March
ƒYear 2000
ƒDate 1 Wednesday
ƒTime 12:00pmŁ
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
≈Set the clock
ƒDaylight savings (OFF)
ƒMonth March
ƒYear 2000
ƒDate 19 Sunday
ƒTime 12:00pm
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
≈Set the clock
ƒDaylight savings (OFF)
ƒMonth March
ƒYear 2000
ƒDate 19 Sunday
ƒTime 7:00pmŁ
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select