Table of Contents
Advertisement
Recording
Selecting S-input Setting
To watch the picture from other equipment through the VCR, you have to
select the S-video input jack or video input jack that matches the equipment. If
you connect the satellite receiver to the VCR with an S-video cable, you have to
set Rear S-input to ON.
1
Press MENU on the remote control. VCR Main Menu appears.
2
Press the ADJUST buttons on the remote control to select S-VHS Set-Up.
Press ENTER.
3
Press the ADJUST buttons to select Front S-input if you use the front
panel jacks, or select Rear S-input if you use the rear panel jacks.
4
Press ENTER to select which input jack to input.
• select OFF when you want to input signals from video input jack.
• select ON when you want to input signals from S-video input jack.
5
Press MENU twice to exit the menus.
Using S-through
This function allows you to view the video signal from the equipment con-
nected to the back of the VCR even when the VCR is off. To use this function,
you have to connect your VCR and TV, and also connect your VCR and the
other equipment with an S-Video cable. For example, if you connect satellite
receiver with an S-Video cable, you can watch the satellite video signal on your
TV with the VCR power off when you set Rear S-through to ON.
1
Press MENU on the remote control. VCR Main Menu appears.
2
Press the ADJUST buttons on the remote control to select S-VHS Set-Up.
Press ENTER.
3
Press the ADJUST buttons to select Rear S-through.
4
Press ENTER to set Rear S-through to ON or OFF.
5
Press MENU twice to exit the menus.
ªVCR Main Menu
¬Program to record
PrograManager
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
»S-VHS Set-Up
ƒS-VHS record
(AUTO)
ƒS-ET record
(OFF)
ƒFront S-input
(ON )
ƒRear S-input
(OFF)
ƒRear S-through
(OFF)
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to change
∑ ππADJUST to select
»S-VHS Set-Up
ƒS-VHS record
(AUTO)
ƒS-ET record
(OFF)
ƒFront S-input
(OFF)
ƒRear S-input
(ON )
ƒRear S-through
(OFF)
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to change
∑ ππADJUST to select
ªVCR Main Menu
¬Program to record
PrograManager
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
»S-VHS Set-Up
ƒS-VHS record
(AUTO)
ƒS-ET record
(OFF)
ƒFront S-input
(OFF)
ƒRear S-input
(OFF)
ƒRear S-through
(ON )
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to change
∑ ππADJUST to select
25
Advertisement
Table of Contents
