Mitsubishi HS-U776 Owner's Manual page 45

Advanced Features
2 The screen for selecting the data to display will appear. Press the ADJUST
buttons to select Display current data and press ENTER.
3 The contents of the tape that is currently loaded will appear. Press INPUT.
4 The screen for selecting the tape number will appear. Press the number
button that corresponds to the desired tape number (for example, no. 0).
Press ENTER.
5 The message to confirm the selected tape number will appear. Press
ENTER to enter the displayed number. The contents of that tape will be
memorized for the selected tape number and the screen will be turned off.
If the data of the recorded program already exists for the selected tape
number, the data that is memorized previously will be erased.
setting the tape number before the recording begins
1 Load the tape. Press MENU on the remote control. VCR Main Menu
appears. Press the ADJUST buttons to select PrograManager. Press
ENTER.
2 The screen for selecting the data to display will appear. Press the ADJUST
buttons to select Select Tape No. and press ENTER.
PrograManager
Your choices are:
ƒDisplay current data
ƒDisplay memorized data
Use ADJUST to select,
and ENTER.
Press MENU to go back.
PrograManager
Tape No.- Page 1/1
Sep. 2 Sat 10:00a CH
Oct. 5 Thu 1:00p CH 100
Nov. 6 Mon 9:00p SAT256
Dec.10 Sun 8:15a EXT
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER to search.
Press INPUT to memorize.
PrograManager
Tape No.0 Page 1/1
ππππππππππππππππππππππππ
Use 0-9 to select number
to memorize, and ENTER.
Press CANCEL to clear.
PrograManager
VCR memorize REC data to
Tape No.0
Press ENTER to memorize.
Press CANCEL to cancel.
Press MENU to exit.
ªVCR Main Menu
¬Program to record
PrograManager
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
PrograManager
Your choices are:
ƒSelect Tape No.
ƒDisplay memorized data
Use ADJUST to select,
and ENTER.
Press MENU to go back.
2
1
43