Table of Contents
Advertisement
Timer Recording
5
Day will flash. Press the ADJUST buttons to choose the day on which you
want to record; for example, Monday the 13th.
Your choices are:
• a single day up to one month away
• every day from Monday through Friday; for example, to tape a soap opera.
To program, press the ADJUST buttons until Monday-Friday appears.
• the same day every week; for example, to tape your favorite weekly
sitcom. To program, press the ADJUST buttons until Every and the
desired day of the week appears.
Press ENTER once you have made your choice.
6
The hour numbers of the start time will flash. Press the ADJUST buttons
to set the hour when recording is to start. Press ENTER.
7
The minute numbers of the start time will flash. Press the ADJUST
buttons to set the minutes when recording is to start. Press ENTER.
8
Set the stop time the same way as the start time, using steps 6 and 7.
9
Press the ADJUST buttons to set the recording speed:
SP = standard play; EP = extended play; AUTO = auto. Auto speed
programming is discussed on page 33. Press ENTER.
If you press ENTER when you set the timer recording incompletely,
Program is not completed will appear on your screen.
If two programmed recording times overlap, VCR is already
programmed for that time will display on your screen for about 3
seconds, and then the Recap screen will appear. The program you have
just set will flash for 3 seconds and the start time and the stop time
will be shown in red letters. The start and stop time of the overlapped
program will be highlighted in red color. You will need to erase one of
them.
10 The programmed memory will appear on the Recap screen. "S" next to
the channel number indicates satellite channels.
11 To program additional recording times, select an empty program line by
pressing ADJUST buttons. Press ENTER. The VCR Plus+ Program to record
menu will appear. Continue the programming procedure from step 3.
12 When you are finished with all programming, check the following:
• If you have a cable box, a digital cable box, a PRIMESTAR
™
Network
satellite receiver, leave the cable box or receiver turned ON.
• If your VCR does not control your cable box, leave the box tuned to the
station you wish to record.
• Turn the VCR power OFF and make sure the programmed recording
light is lit.
When programmed recording of 4 and under are entered, only 4 of
the 8 program lines appear on the Recap screen at any one time. To
see additional program lines, press the ADJUST buttons to scroll the
lines on the screen.
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
®
or a DISH
¬Program to record
ƒChannel
ƒDay
Monday 13
ƒStart time
--:--
ƒStop
time
--:--
ƒRecord speed
AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
¬Program to record
ƒChannel
ƒDay
Monday 13
ƒStart time
11:00am
ƒStop
time
--:--
ƒRecord speed
AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
¬Program to record
ƒChannel
ƒDay
Monday 13
ƒStart time
11:30am
ƒStop
time
1:30pm
ƒRecord speed
SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
¬Program to record
CH DAY
ON
OFF
10 TH16
9:00p10:00pSP
§
2 MO13 11:30a 1:30pSP
--- --
--:-- --:-- SP
--- --
--:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
Recap screen
2
2
2
29
Advertisement
Table of Contents
