Table of Contents
Advertisement
Advanced Features
PrograManager (auto mode)
To avoid failing to memorize the contents of the tape caused by not setting the
tape number, the screen to decide whether you set the tape number will appear
when the tape is loaded if you set the PrograManager in the Customize Choices
menu to AUTO. This screen will reappear when the tape is ejected and the
tape number for that tape is not set. If you do not want this screen to appear,
set it to OFF.
3
Complete steps 1 and 2 on page 48. Customize choices menu appears.
Use the ADJUST buttons to select Go to next page. Press ENTER.
4
Press the ADJUST buttons to select PrograManager. Press ENTER to
select AUTO or OFF.
5
Press MENU twice to turn off the menus.
loading the tape when the PrograManager in the Customize Choices
menu is set to AUTO
1
Load the tape. The screen to decide whether you set the tape number will
appear. Select Yes when you want to set the tape number. Press ENTER.
2
The contents of the tape that is memorized as No.0 will be displayed.
Press the number buttons to enter the tape number you want to set.
3
The message to confirm the selected tape number will appear. Press
ENTER to enter the displayed number. The menu will be turned off.
unloading the tape when the PrograManager in the Customize
Choices menu is set to AUTO
1
When unloading the tape of its tape number is not set and the program
has been recorded, the screen will appear to decide whether you
memorize the recorded data. Select Yes when you want to memorize the
data. Press ENTER.
2
The screen for selecting the tape number appears. Press the number
button that corresponds to the desired tape number. Press ENTER.
3
The message to confirm the selected tape number will appear. Press
ENTER to enter the displayed number. The screen will be turned off.
If the data of the recorded program already exists for the selected tape
number, the data that is memorized previously will be erased.
If the tape number of that tape has already set, the recorded data will be
memorized on that tape number automatically while ejecting. Therefore,
this screen will not appear.
52
√Customize choices
ƒVideo mute
(ON )
ƒAuto power save
(OFF)
ƒRF converter
(ON )
ƒPerfecTape
(AUTO)
Go to next page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
√Customize choices
ƒRental Xpress
(OFF)
ƒA/V Network
(ACTIVE)
ƒPrograManager
(AUTO)
Back to previous page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to change
∑ ππADJUST to select
PrograManager
Do you set the Tape No.
of this Tape?
ƒYes
ƒNo
Use ADJUST to select,
and ENTER.
Press MENU to exit.
PrograManager
Do you memorize REC data
of this Tape?
ƒYes
ƒNo
Use ADJUST to select,
and ENTER.
Press MENU to exit.
Advertisement
Table of Contents
