Table of Contents
Advertisement
Timer Recording
Program caution
If your VCR is set to record, but the power is still ON within 3 minutes before
timer recording starts, this screen will appear to remind you to turn off the
VCR.
If the VCR is still turned on 12 seconds before the start time of the recording,
that timer recording will be cancelled.
TV programs that end on the day after
If you want to start the recording at 11:00 PM and end it at 2:00 AM the next
day, simply set the start time to 11:00 PM on the recording start day and the
end time to 2:00 AM. There is no need to change the day of the week.
Program skip using menus
Sometimes you may want to skip one day of a timer recording but do not want
to erase it. Program skip will prevent the recording, for that day only, of a
program you have scheduled to record every day or every week.
1
Press MENU on the remote control. Your VCR will turn on and VCR Main
Menu will appear. Press the ADJUST buttons to select Program to record.
Press ENTER.
2
Recap screen will display for 4 seconds. While this screen is displayed,
press the ADJUST buttons to place the cursor arrow next to the program
you wish to skip.
3
Press STOP. The cursor arrow will change to a
4
Press MENU twice to turn off the menus.
To resume recording every day or every week, change the
arrow by following steps 1 to 4 again.
Program skip using the POWER button
If you have entered only one program into your VCR's memory, you can skip
the program without going into the VCR's menus. Simply press POWER on the
front panel once. The programmed recording light will turn off, and the
program will be skipped. If you decide not to skip the program, press POWER
on the front panel twice; the programmed recording light will light up again.
Changing timer recording settings
1
Press MENU on the remote control. Your VCR will turn on and VCR
Main Menu will appear. Press the ADJUST buttons to select Program to
record. Press ENTER.
2
Recap screen will display for 4 seconds. While this screen is displayed,
press the ADJUST buttons to place the cursor arrow next to the program
you wish to change. Press ENTER. You will see the Program to record
setting menu.
3
Press ENTER repeatedly to select the item you wish to change. Use the
ADJUST buttons to change it. Then press ENTER repeatedly to return
the altered program to the Recap screen.
4
Press MENU twice to turn off the menus. Then press POWER to turn off
the VCR. Make sure the programmed recording light is on.
34
.
X
X
to the cursor
program caution
REC in 3 min
Turn off VCR
¬Program to record
CH DAY
ON
OFF
2 MO13 11:30a 1:30pSP
10 TH16
9:00p10:00pEP
§
2 M-F
8:00a 8:30aSP
--- --
--:-- --:-- SP
Use STOP to skip on/off
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
¬Program to record
CH DAY
ON
OFF
2 MO13 11:30a 1:30pSP
10 TH16
9:00p10:00pEP
X
2 M-F
8:00a 8:30aSP
--- --
--:-- --:-- SP
Use STOP to skip on/off
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
POWER
PROG REC
PROG REC
Recap screen
¬Program to record
CH DAY
ON
OFF
§
2 MO13 11:30a 1:30pSP
--- --
--:-- --:-- SP
--- --
--:-- --:-- SP
--- --
--:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
¬Program to record
ƒChannel
ƒDay
Monday 13
ƒStart time
11:30am
ƒStop
time
1:30pm
ƒRecord speed
EP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
2
Advertisement
Table of Contents
