Removing The Ssr-520 Cables - Cabletron Systems SmartSwitch Router 520 Installation And Configuration Manual

Removing the SSR-520 Cables

To remove cables from the SSR-520 router, see Figure 2-6 and complete the
following steps.
Step
1
2
Action
Press the release tab (1) on the cable plug, then pull out the
cable.
Push in the release tabs (2) on the side of the WAN serial cable
connector, then pull out the cable.
Removing the SSR-520 Cables
Figure 2-6.
Installing and Cabling
2-11