Table of Contents
Advertisement
ADC32RF80 Quick-Start Procedure (Digital DDC Block - Decimation Plus NCO) External Clocking
6. Press SW1 (ADC RESET) to provide a hardware reset to the ADC.
7. Go to the Low Level View tab and click Load Config. Navigate to the provided file called
ADC32RF4x_DDC_8xIQ_8821.cfg and click OK.
8. Press Read All on the Low Level View tab. (The settings loaded by the ADC cfg file in step7 will not be
reflected in the ADC32RFxx main tab unless the Read All is performed.)
9. Go to the ADC32RFxx tab. The ADC32RFxx tab should look like
16
ADC32RF45/RF80 EVM Quick Startup Guide
Figure 13. ADC32RFxxEVM GUI ADC Configuration Tab
Copyright © 2016, Texas Instruments Incorporated
Figure
13,
Figure
14, and
SLAU620A – April 2016 – Revised May 2016
Submit Documentation Feedback
www.ti.com
Figure
15.
Advertisement
Table of Contents
