Table of Contents
Advertisement
ADC32RFxx Quick-Start Procedure ADC32RF45 Bypass LMFS82820 Mode
7. Press SW1 (ADC RESET) to provide a hardware reset to the ADC.
8. Go to the Low Level View tab and click Load Config. Navigate to the provided file called
ADC32RF4x_12bit_LMFS_82820.cfg and press OK.
9. Press Read All on the Low Level View tab. (The settings loaded by the ADC config file in step 7 will
not be reflected in the ADC32RFxx main tab unless the Read All is performed.)
10. Go to the ADC32RFxx tab.
10
ADC32RF45/RF80 EVM Quick Startup Guide
Figure 5. ADC and LMK Configuration Files
Copyright © 2016, Texas Instruments Incorporated
www.ti.com
SLAU620A – April 2016 – Revised May 2016
Submit Documentation Feedback
Advertisement
Table of Contents
