Faema E71 E Use And Installation page 72

seQuentiaL WashinG
Procedure to follow at the end of the working day on all groups or when signalled by the machine.
1
EXECUTE GRoUp 1
WaSh
The sequential washing mode appear
on the display.
4
Insert the rubber disk into the filter
holder with its filter.
7
EXECUTE GRoUp 1
WaSh
Press the icon .
10
REMoVE FIlTER holDER
GRoUp 1
push
At the end of the group 1 wash cycle,
the message "REMOVE FILTER
hOLDER GROUP 1" will appear.
12
GR 1 RInSE
065%
The message "GR.1 RINSE"will be
displayed followed by the percentage
of completion.
2
Remove the filter holder from the
coffee group.
5
Pour in a packet or dosing cupful of
detergent powder.
8
InSERT FIlTER holDER
GRoUp 1
push
Press the icon .
11
Remove the filter holder and press the
icon .
13
EXECUTE GRoUp 2
WaSh
push
At the end of the group 1 rinse cycle,
the message "EXECUTE GROUP 2
WASh" will appear.
28 EN
3
Using a brush, clean the cover gasket.
6
H o o k t h e f i l t e r h o l d e r
Group 1.
9
GR 1 WaSh
015%
Group 1 washing
cycle will start.
T h e m e s s a g e
"GR.1 WASh"will
a p p e a r o n t h e
display followed
by the percentage
of completion.
The indication with the progress
bar will appear on the unit display.
14
Repeat the operations described
above for all machine groups.
Do not remove the filter holder during
coffee dispensing.
t o