Blemishcontrol; Shadingcontrol - JAI GOX-6409M-PGE User Manual

BlemishControl

Configure settings for JAI white blemish correction.
Item
BlemishEnable
BlemishDetect
BlemishDetectionResult
BlemishStore
BlemishDetectThreshold
BlemishCompensationIndex
BlemishCompensationPositionX
BlemishCompensationPositionY
BlemishCompensationDataClear
BlemishCompensationNumber

ShadingControl

Configure shading correction settings.
Item
ShadingCorrectionMode
ShadingMode
PerformShadingCalibration
ShadingDetectResult
Go-X Series Rolling Shutter GigE Vision I/F (Preliminary)
Setting range Default value
True, False True
ー ー
ー ー
ー ー
1 ～ 100 10
1 ～ 256 1
GOX-6409MC-PGE:
-1
-1～3087
GOX-12409MC-PGE:
-1～4015
GOX-20409MC-PGE:
-1～5471
GOX-6409MC-PGE:
-1
-1～2063
GOX-12409MC-PGE:
-1～3035
GOX-20409MC-PGE:
-1～3647
ー ー
0 ～ 256 0
Setting range Default value
0:Flat Shading
0:Flat Shading
1:Color Shading
0:Off, 2:User1
0:Off
3:User2, 4:User3
ー ー
ー ー
Enable/disable blemish correction.
Execute blemish detection.
This command cannot be executed under the following conditions.
・When no image is output
・In single ROI mode
・In Binning mode
Display the blemish detection results.
0:Idle
1:Succeeded
3:Error2 - exceeded max compensation number
4:Error3 - could not detected
5:Error4 - timeout
Save the location information of detected blemishes.
Set the blemish detection threshold.
Select the index for the target blemish coordinates
(BlemishDataPosition X/Y).
Display the X coordinate (horizontal pixel position) of the target blemish
selected in [BlemishCompensationIndex].
You can also manually enter the X coordinate of the blemish you want to correct.
Display the Y coordinate (vertical pixel position) of the target blemish selected
in [BlemishCompensationIndex].
You can also manually enter the Y coordinate of the blemish you want to correct.
Delete detected or specified blemish information selected in
[BlemishCompensationIndex].
Display the number of target blemishes.
Select the shading correction method.
Set the area to which to save shading correction data.
When this is set to [Off], shading correction data is not saved.
Execute shading correction.
This command can not be executed under the following conditions.
・When no image is output
・Outputting TestPattern
・In Binning mode
Display the shading correction results.
[results]
0: Condition Error, 1: TooDark, 2: TooBright, 3: Correction Limit, 4: Complete
65
Description
・Outputting TestPatter
Description