10.7 Commissioning
10.7.2 Conducting Commissioning for Servo Amplifiers
While in the online config mode, you can conduct commissioning for servo amplifiers.
There is no need to create a program for commissioning.
The following is an example of commissioning using the A6N-series servo amplifiers.
1.
Double-click the servo amplifier object in the navigator pane.
The "RTEX Axis Setting" dialog box will be displayed.
2.
Click the "Commissioning" tab.
The Commissioning screen will be displayed.
10-20
WUME-GM1RTXSU-01