8.1 Initial Setup for Servo Amplifiers
8.1 Initial Setup for Servo Amplifiers
8.1.1 Connecting the Servo Amplifier and PC
Use a USB cable to connect the servo amplifier and a PC on which PANTERM Lite for GM has
been installed.
8.1.2 Installing the USB Driver
When the GM Programmer is installed, the USB driver is also installed at the same time.
8.1.3 Initial Setup for Servo Amplifiers
1.
Start PANATERM Lite for GM.
The "Connect" dialog box will be displayed.
8-2
WUME-GM1RTXSU-01