Communication Setting; Setting The Lan Port; Addition Of The Usb Port - Panasonic GM1 User Manual

10.3 Communication Setting

10.3 Communication Setting

10.3.1 Setting the LAN Port

Set communication settings of the LAN port through the network settings of the PLC
parameters.
When connecting the GM Programmer and the GM1 via the LAN port, match the PC network
settings with those of the GM1.
1.
Double-click the "Device(AGM1CSRX16T)" object in the navigation pane.
The device editor will open.
2.
Open the "PLC Parameters" tab.
3.
Check the GM1 network settings and match the PC network settings with those of the GM1.
4.
Open the "Communication Settings" tab and click "Network scan".
5.
Select a GM1 Controller that you want to connect and click the [ OK ] button.
● When the GM1 settings have been changed, the changes will become valid after the
project is downloaded.

10.3.2 Addition of the USB Port

This function allows the user to set a USB port to the communication interface between the GM
Programmer , PANATERM Lite for GM, or other tool and the GM1 Controller.
1.
Connect the GM1 Controller and PC with a USB cable .
2.
From the menu bar, select Online>Add USB Port.
10-6 WUME-GM1RTXSU-01