Initialization Procedure; Communication Setting - Panasonic AFPX-COM5 User Manual

Hide thumbs Also See for AFPX-COM5:

7.7.7 Initialization Procedure

Overview

• The Ethernet communication environment setting of the AFPX-COM5 can be initialized.

I nitialization procedure

1. Turn on the switch at the back of the AFPX-COM5.

2. Install the AFPX-COM on the FP-X and turn on the power supply.

3. The ERR. LED of the AFPX-COM5 flashes every 5 seconds. (Initialization completes.)

4. Turn off the power supply of the FP-X. Remove the AFPX-COM5.

5. Turn off the switch at the back of the AFPX-COM5.

6. Install the AFPX-COM5 on the FP-X, and turn on the power supply.

Note) The Ethernet communication setting (including the IP address) cannot be changed when the

switch at the back of the AFPX-COM5 is on. Always turn it off after initialization.

Setting for initialization

IP address setting

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com

Item

Unit name

IP address

Subnet mask

Default gateway

Item

Communication mode

Action mode

Baud rate (COM1)

Source port No.

Time out

Default

FPX_ET

192.168.1.5

255.255.255.0

192.168.1.1

Default

Computer link

Server mode

9600 bps

9094

Table of Contents