Using a CF Card Extension Unit
The CF Card Extension Unit (DT-894CFU) supports use of CF Type I cards and Type II
cards (3.3/15V).
DT-894CFU
Use the procedure below to load and remove CF cards.
Important !
• Installing some cards will make it impossible to close the card slot cover. When
that happens, you can either use the Large Card Cover or you can use the
Handheld Terminal and CF card without a card slot cover. Keep the card slot
cover in a safe place where you will not lose it.
• When using a CF storage card, be sure to close the card slot cover.
Attaching the CF Card Extension Unit
Attach the CF Card Extension Unit to the back of the Handheld Terminal. The CF Card
Extension Unit connector is located under a protective cover.
1. Loosen the screws that secure the cover in place, and then remove the cover.
2. Attach the CF Card Extension Unit, and secure it in place with its screws.
E-54
Bundled Items
Large Card Cover