Connecting the Cradle-type Battery Charger AC Adapter and
Mounting the Power PC Terminal
Use the special AC adapter that comes with the Cradle-type Battery Charger to connect
to a power source.
1. After making sure that the Cradle-type Battery Charger power switch is turned off,
plug the AC adaptor into the AC adapter jack on the back of the cradle.
2. Next, plug the AC adapter into a power outlet.
3. Turn on power. This causes the Cradle-type Battery Charger power indicator lamp to
light red.
4. Making sure that their power contacts come into contact with each other, place the
Handheld Terminal onto the Cradle-type Battery Charger. This causes the Cradle-
type Battery Charger power indicator lamp to light green.
The indicator on the Handheld Terminal changes from red to green when charging is
complete.
Important !
Take care to avoid allowing the Cradle-type Battery Charger power contacts to
become connected to each other, which creates a short.
Shorting the power contacts can damage the Cradle-type Battery Charger.
Power switch (OFF)
Power contacts
POWER
DATA
Power switch (ON)
LINE
Power Indicator Lamp
E-45