Loading Pellet - Jøtul PC 900 Installation, Operation And Maintenance Manual

ENGLISH
6�4 LOADING PELLET
Pellet is loaded through a flap made in the housing and
connected with the insert by means of special accessories
(optional)� Installation is carried out according to the
instructions on the packaging�
Do not use the smoke exhaust system to fill the pellet
container�
It is not recommended to install non-original accessories�
Spilling of pellet outside of the container may cause
damage, make correct operation of the insert impossible,
or cause a fire�
The pipe for filling with pellet should be used only to fill
the insert's container, not as an extension of the container�
Avoid loading a larger amount of pellet than the container
allows�
6�4�1 Available options:
A) Loading system with metal pipe and loading door "1"
(fig. 6.4.1)
B) Front loading drawer for version with air outlet on
the front "2" (fig. 6.4.2)
C) Socle set "3" (fig. 6.4.3)
D) Finishing frame "4" (fig. 6.4.3)
14
2
4
3
1
fig� 6�4�1
fig� 6�4�2
fig� 6�4�3