Lock Settings - Carrier XCT7 40VCW117FQEE Installation And Owner's Manual

Lock Settings/ Fahrenheit Setting
Central/Lock Function
• Function is active only when system has a central control, such as the YCZ-A004. This setting is activated only by
the central Control.
Central Control
Central Lock
Fahrenheit Setting and Display:
• Fahrenheit to Celsius: Adjust set temperature to lowest setting; 16°C when ECO is off. Press and hold TEMP- for
15 seconds. During the 15 second count the display will beep once at 5 seconds and display error codes. Then
after another 5 seconds, the display will beep once again and display 00, after 5 more seconds the display will
change to Celsius.
• Celsius to Fahrenheit: Adjust set temperature to highest setting; 30°C when Eco is off. Press and hold TEMP+
for 15 seconds. During the 15 second count, the display will beep once at 5 seconds and enter Special Functions
menu. Then after another 5 seconds, the display will show 00, after 5 more seconds the display will change to
Fahrenheit.
/
On/Off function only available.
No functions available.
9