12. TROUBLESHOOTING
12.1 Fault Reset
When the Bluetooth system is not working properly, you can easily reset
the unit:
1. Partially pull out the neck roll from the rear side of the helmet.
2. Locate the pinhole reset button as described below.
3. Gently insert a paperclip into the hole and tap the Fault Reset
Button with light pressure. The Bluetooth system will shut down.
Fault Reset
=
Note: Fault Reset will not restore the Bluetooth system to factory
default settings.
12.2 Factory Reset
To erase all of your settings and start fresh, the system can be restored
to factory default settings using the factory reset.
=
=
HOLD
15s
TAP
1x
MOMENTUM EVO Motorcycle Bluetooth
TAP
1x
TAP
=
2x
Helmet With Mesh Intercom™ | 45
®