Alarms - Orlanski ORLIGNO 100 Manual And Service Manual

19. Alarms

Menu contains history of maximum 20 alarms, that occured during controller's work. Meanings of
code alarms is shown below:
Alarm codes and their meaning.
Code Short description
1 Processor's overheating
2 Lack of fl ame/fuel
3 Burner's overheating
4 Boiler's sensor short circuit
5 Boiler's sensor break
6 Burner's sensor short circuit
7 Gape of burner's sensor
8 Boiler's overheating
9 Processor reset
Controller's processor has been overheated. Improper
controller placement may be one of the reasons.
Controller detected lack of fl ame in burner. Lack of fuel
or fl ame gone out may be one of the reasons.
Burner's temperature has exceeded maximum value
Controller detected short circuit. Damaged sensor or
connecting wire may be one of the reasons.
Controller detected gape of boiler sensor. Damaged
sensor or conecting wire may be one of the reasons.
Controller detected gape of sensor. Damaged sensor or
connecting wire may be one of the reasons.
Controller detected gape of sensor. Damaged sensor or
connecting wire may be one of the reasons
Boiler's temperature has exceeded maximum value
Possible controller's damage! Lack of power supply
Description
43