Orlanski ORLIGNO 100 Manual And Service Manual page 31

10.3. Shutdown of the controller OFF
In order to turn the controller off (mode OFF) press for 3 sec Return, Esc" on main display, when it
is in ON mode.
ATTENTION!
After controller shutdown depending on its previous status, burner may still work
(extinguishing ), it's not advisable to disrupt this process. If controller will be
disconnected from main power, please wait till burner status is on OFF mode.
10.4. Time programs
Controller is equipped with clock and calendar. Thanks to that it is possible to program work of
individual parts of heating system depending on current time and weekday. Date and time aren't
deleted during power outage because controller contains battery, which needs to be replaced
every 2 years.
Programming takes place in menu of given heating circuit ( ex. hot domestic water, heating, water
tank) and for each element proceeds in the same way.
Weekday choice. After entering in menu " Time program", weekday pulsates, with arrow buttons
choose day for setting or just to check program settings.
Programming. After choosing weekday and confi rming with "Enter" button; current programmed
hour starts to pulsate, next to displayed hour, icon with chosen time zone is shown (sun symbol
stands for comfort temperature, moon symbol – economic temperature). To move to next hour
press "arrow down" button ( comfort temperature) or "arrow up" (economic temperature). If all
day is programmed press "enter". After confi rmation of changes (or cancellation) weekday starts
to pulsate.
grate status
actual set temperature
Economic temperature 00:00 - 6:00
Comfort temperature 6:00 - 9:00
Economic temperature 9:00 - 18:00
Comfort temperature 18:00 - 24:00
day
chosen temperature (economic)
arrow up – set comfort temperature
arrow down – set economic temperature
31