Basic Informations; Construction Description And Burner Application - Orlanski ORLIGNO 100 Manual And Service Manual

1. Basic informations

1.1. Construction description and burner application

Self- cleaning burner is a new look into the automatic burning of solid fuels in Europe – pellets of
6-8 mm of diameter or as a option oats with maintaining low emissions, complying with European
norms.
Burner doesn't have any drawbacks of chute burners –gravitational, in which ash and sinter have
to be removed manually.
Main burner advantage is its simple service: just fill in hopper with pellets and press START button.
Reports are shown on big graphic display. Within few minutes burner will automatically select work
parameters, maintain constant room temperature and hot utility water.
Burner's features:
- automatic burner's start
- automatic modulation
- flame control through photo-cell
- low heat inertness during start and stop
- low electric energy consumption
- possibility to control 16 heating circuits (radiators and underfloor heating or hot utility water)
– option
- control of burner's temperature
- three phases of lightning up eliminate risk of explosions
- AUTOSTART function after power failure – memory of last settings
- separation of primary and secondary air – emissions on the same level as in gas and oil
burners
- efficiency > 94,5%
- soot = 0
- self-cleaning function, automatically removes ash from the burner's grate
- oats –burner's construction enables to burn grain (oats) – option
2 years of warranty for appliance durability enables to decrease exploitation and service
costs.
Burner's regulator can control:
- boiler pump
- 1-16 heating circuits (radiators or underfloor heating) controlled according to outside
temperature
- room's temperature
14